i got my self a project watch

Posts

69

Likes

80

Freddedw

·Jan 3, 2021

have not got it yet and the pic and info is from the auction and a bit fuzzy. They claim its a cal 244, 17 Jewels
Ref: 2668-9 sc 2655 serial 14526408, well see got no pic on that. runs but have a hard wind up. Got it for 70Euro.
my plan is to use it for practise, open and clean and so on, but it seem quite original but is it...Hiss or diss?

 

Posts

14,629

Likes

42,472

Canuck

·Jan 3, 2021

Be sure to keep us posted as to your progress in servicing it.

 

Posts

16,307

Likes

44,939

JwRosenthal

·Jan 3, 2021

Looks like a nice little ladies watch, and aside of the dial damage, would be a nice little watch.
Are you sure you want to practice on something like this? The movement is probably smaller than a dime. Perhaps buy a $25 Miyota and start with that?

 

Posts

69

Likes

80

Freddedw

·Jan 3, 2021

well we will se how it looks and runs when i got it im my hands, if i dare or not😀

 

Posts

14,629

Likes

42,472

Canuck

·Jan 3, 2021

You might be looking at something like either of these two. Both about 1\2 “ in diameter. You must have worked on such watches before! Hung ho!

 

Posts

211

Likes

170

Lancaster

·Jan 4, 2021

Looks like a good candidate for restoration.

 

Posts

69

Likes

80

Freddedw

·Jan 4, 2021

Im just planning on some cleaning nothing major, got to start somewhere, i also got a 15euro no-name to start on before this.

 

Posts

211

Likes

170

Lancaster

·Jan 4, 2021

I wouldn't be surprised if that dial cleaned up nicely.

 

Posts

14,629

Likes

42,472

Canuck

·Jan 4, 2021

Describe your intended process for cleaning the Omega, please.

 

Posts

2,710

Likes

17,410

jaguar11

·Jan 4, 2021

Have fun and keep us updated!!!

 

Posts

10

Likes

21

Tomdutchman

·Jan 4, 2021

looking forward seeing more pictures of the watch as it arrives. and then ofcourse your steps in bringing it back from the zombie state its in. Been thinking on buying a ladies watch as a project watch too. Endulge the hobby and be able to please the wife with a nice omega afterwards 😀

 

Posts

9,596

Likes

27,674

ConElPueblo

·Jan 4, 2021

Are you aware that it is a very small women's model?

 

Posts

69

Likes

80

Freddedw

·Jan 4, 2021

im just going to have a look inside, clean some dust se if i can clean the dial softly look if i can find someting obvious that makes the wind hard, and yes its a small ladies watch, guess ill have to get a better optics then ;-), if it works out fine i got 3 daughters that might want it, you newer know. if i brake it, well then i shall not take my seamasters apart..

 

Posts

69

Likes

80

Freddedw

·Jan 4, 2021

Canuck

You might be looking at something like either of these two. Both about 1\2 “ in diameter. You must have worked on such watches before! Hung ho!

no, but if i dont start ill newer will, im not planing to disassemble it completly, god no, i got some limits.