Hello! New to the forum and 565 movement stopped

ezyddlb · Jun 9, 2020

Greetings everyone.

I've got a 1960s omega sea master (automatic and date) which I have loved owning for the past year or so.

However in the past 3 months it has started to gain time and would occasionally stop, only to restart with a 'tap' on the face. It has now stopped completely.

I am a reasonably accomplished mechanic, but I am a total novice with watches. In my ignorance I thought I'd have a look to see what I can see.

The mainspring is still functional and was fully wound (I unwound it). If I apply very light pressure to the second hand gears (I'm aware that my technical vocab is lacking) , the watch will tick nicely. It seems that power is not being transfered from the spring to the rest of the mechanism.

I realise I probably am wholly unqualified for this task. But if anyone had a recommendation of a part to check, or where to look, I'd be very grateful. I'm keen to learn.

By way of introduction, hello to the forum and thanks for all the info compiled here.

David

efauser · Jun 9, 2020

ezyddlb · Jun 9, 2020

efauser

Thanks that's cleared it up.

Although i hasten to add its back together

ChrisN · Jun 9, 2020

Well done for letting down the mainspring to release the torque before taking the train bridge off.

Unfortunately, the issue could be one of many things and you really need a watchmaker to look at it. You can't just take a few parts off and see what might make it work again and, even if you get it going, the parts will be dirty and wearing themselves out. The best way is to ask here for a watchmaker in your area who can strip/clean/inspect/lubricate/rebuild your movement. Don't try and put it back together as I can see that you have at least one wheel misplaced and you'll likely cause damage.

Good luck, Chris

STANDY · Jun 9, 2020

Check all the parts, I think I saw a few teeth missing on a cog. (Can you put the pictures back)

You need a watchmaker as that was one dirty movement.

ezyddlb · Jun 9, 2020

ChrisN
Well done for letting down the mainspring to release the torque before taking the train bridge off.

Unfortunately, the issue could be one of many things and you really need a watchmaker to look at it. You can't just take a few parts off and see what might make it work again and, even if you get it going, the parts will be dirty and wearing themselves out. The best way is to ask here for a watchmaker in your area who can strip/clean/inspect/lubricate/rebuild your movement. Don't try and put it back together as I can see that you have at least one wheel misplaced and you'll likely cause damage.

Good luck, Chris

Thanks Chris,

I actually rebuilt the train bridge purely to see if I could.

It functions correctly. I realise I am perhaps way in over my head. And I was naive to think I could just open the movement and find something. I was hoping it would be jammed with lint or debris. The movement is filthy like you say.

I shall defer to the professional and practice on an old seiko

Thanks

Dave

ChrisN · Jun 9, 2020

E ezyddlb
Thanks Chris,

I actually rebuilt the train bridge purely to see if I could.

It functions correctly. I realise I am perhaps way in over my head. And I was naive to think I could just open the movement and find something. I was hoping it would be jammed with lint or debris. The movement is filthy like you say.

I shall defer to the professional and practice on an old seiko

Thanks

Dave

Yes, the movement is dirty and it takes very little to stop these as the forces are so small. That's why it needs completely stripping and cleaning before reassembly. Again, well done for getting the train bridge back on - many would have broken something doing that!

If I might suggest an ETA 6497/6498 Chinese clone to try out as they are not expensive and are the ones we learn on in a watchmaking course. The Seiko calibres have their quirks...

Cheers, Chris

Hello! New to the forum and 565 movement stopped

ezyddlb

efauser

ezyddlb

ChrisN

STANDY

ezyddlb

ChrisN

Similar threads

New to the forum and hobby

New to the forum and new arrival Seamaster 300 white dial

Three threads everyone new to the Forum and watches should read.

New to the forum - and my new (to me) SM 30

New to the forum and here is my Speedy

New to the forum and first OMEGA