Winding newly acquired Speedmaster

Posts
7,561
Likes
13,959
I tried this yesterday and hit the point where the crown just wouldn’t turn anymore.

Thank you guys for sharing that!
Now wear it!
 
Posts
60
Likes
157
Thank you all. I took your advice and pushed through.
Felt resistance initially but once past the atmosphere winding got smoother. Once all fuel had been burnt there was no going further 😀
 
Posts
477
Likes
495
Now wear it!
Trust me, I can’t wait to wear it.

the two month wait will kill me, but it is an exercise in self control!
 
Posts
1,434
Likes
6,513
This isn’t the swinging sixties or the free-love seventies. We’re supposed to be woke. When a watch resists, you stop.

No means no.

Er, you my friend, can be as woke as you like, I am merely awake.

Beyond the word play available to users of the English language, I find myself wondering how it can be that a watch brand like Omega can produce a watch the simple winding of which requires outside technical advice and support: really?

I admit to being completely ignorant of the technical specification of this new model but which watch in the history of watchmaking required anything more than a simple winding of the crown to get it going?
 
Posts
477
Likes
495
Er, you my friend, can be as woke as you like, I am merely awake.

Beyond the word play available to users of the English language, I find myself wondering how it can be that a watch brand like Omega can produce a watch the simple winding of which requires outside technical advice and support: really?

I admit to being completely ignorant of the technical specification of this new model but which watch in the history of watchmaking required anything more than a simple winding of the crown to get it going?
I apologize, but I don’t see the problem in asking questions.

that’s what forums are for!
 
Posts
439
Likes
935
I apologize, but I don’t see the problem in asking questions.

that’s what forums are for!
His critic is not towards you asking questions, he just thinks it shouldn't be so "complicated" to know how to wind your watch.
 
Posts
2,889
Likes
11,945
Just as an FYI the 3861 is the most difficult wind I’ve had on a speedy. It loosens up over time and now after 6 months it’s as easy as the 1861 now. You may notice the same, but it’s nothing to worry about.
 
Posts
7,561
Likes
13,959
When my grandmother bought me my first watch from a small town jeweler in Wisconsin in 1959 almost all watches were manuals, I needed no instruction. You pulled out the crown to set the time, and wound it up until the crown stopped every morning to keep it running. I saw my dad do that many times and a kid just knew how to use a watch. I still have the watch and it still runs.

With the internet and its massive amounts of data almost any simple activity can be discussed to the nth degree. In many cases we have lost the desire to figure out simple things for ourselves. We have become less independent.
Edited:
 
Posts
17,601
Likes
36,809
When I was a young kid, all of my toys that had autonomous movement had to be wound, usually with a key.

My Hornby train set was spring powered, as were a number of my toy cars, although some were "pull back", and when you let them go, they'd take off across the floor, or spear off the end of the kitchen table.

My Dad would wind the mantel clock in the sitting room every Sunday, and he would wind his Westclox bedside alarm clock every night for work. And in the morning, he'd wind his watch for the day.

To me, growing up with that technology, and buying my first Omage at 18 and having to wind it every day, and knowing how to do it and when to stop, was no more a mystery than any other "natural function" (to put it politely).

For the younger generations who, as children, were more familiar with battery powered toys, electric clocks and other things that "ran by themselves", it can be a skill that has to be learn't, as it is no longer instinctive.

So I think we should give them the benefit of our "ancient wisdom" occasionaly, and trust that they can pass that knowledge to their peers, or their offspring, depending on their circumstances.

As an example, if my parents ever saw this they would either be amazed, stunned in disbelief, or attempt to smash it as "the work of the devil".


Not to label them as "simple folk" though, my Mum, as a young girl, was a radar operator during World War Two and my Dad could fix anything that ever broke (mainly our toys).
 
Posts
477
Likes
495
His critic is not towards you asking questions, he just thinks it shouldn't be so "complicated" to know how to wind your watch.

Allow me to explain myself.

I’m 29 years old, unfortunately, when I grew up most people I knew bought quartz watches.

The few people that I knew with hand wind watches (not luxury brands) always said “you wind it until you feel the crown feels harder to wind. There is no reason to keep going because if you do, you might break the mechanism.”

Recently I had a Seiko turtle, a Rolex sub and a Rolex Datejust, all of which allow hand winding but are also automatic, and have a mechanism to protect the watch from being over wound. So I never felt resistance when winding.

I recently bought a Timex Marlin 34. My first watch that is only manual wind.

Below is what the Timex instructions say.

That is why I was unaware of having to wind it until the crown hits some sort of mechanical stop, as the Timex instructions mirror what I had heard as a child.
 
Posts
1,434
Likes
6,513
His critic is not towards you asking questions, he just thinks it shouldn't be so "complicated" to know how to wind your watch.


He doesn't comprehend how it can be any more complimacated than possibly releasing a screw-down crown before taking a gentle grasp of the crown and twirling it gently, either in a clockwise direction or in the old style to and fro manner. And I have this genuine quest for knowledge.

I apologize, but I don’t see the problem in asking questions.

that’s what forums are for!

Ask away, honestly, ask away. Let's find out together.... every day's a learning day after all.
 
Posts
1,434
Likes
6,513
In the 24th century, the Borg wear Omegas and assimilate all other brands.

I had one of these at the front door a week or two ago, trying to sell me timeshares in some leisure complex on the planet zog.
 
Posts
886
Likes
471
Er, you my friend, can be as woke as you like, I am merely awake.

Beyond the word play available to users of the English language, I find myself wondering how it can be that a watch brand like Omega can produce a watch the simple winding of which requires outside technical advice and support: really?

I admit to being completely ignorant of the technical specification of this new model but which watch in the history of watchmaking required anything more than a simple winding of the crown to get it going?

Actually, you may run into a bit of trouble with an older Seiko automatic with your reasoning.
In that case I always recommend the old tried and true method. RTFM.
 
Posts
886
Likes
471
He doesn't comprehend how it can be any more complimacated than possibly releasing a screw-down crown before taking a gentle grasp of the crown and twirling it gently, either in a clockwise direction or in the old style to and fro manner. And I have this genuine quest for knowledge.



Ask away, honestly, ask away. Let's find out together.... every day's a learning day after all.

If in doubt. Ask👍
 
Posts
886
Likes
471
When I was a young kid, all of my toys that had autonomous movement had to be wound, usually with a key.

My Hornby train set was spring powered, as were a number of my toy cars, although some were "pull back", and when you let them go, they'd take off across the floor, or spear off the end of the kitchen table.

My Dad would wind the mantel clock in the sitting room every Sunday, and he would wind his Westclox bedside alarm clock every night for work. And in the morning, he'd wind his watch for the day.

To me, growing up with that technology, and buying my first Omage at 18 and having to wind it every day, and knowing how to do it and when to stop, was no more a mystery than any other "natural function" (to put it politely).

For the younger generations who, as children, were more familiar with battery powered toys, electric clocks and other things that "ran by themselves", it can be a skill that has to be learn't, as it is no longer instinctive.

So I think we should give them the benefit of our "ancient wisdom" occasionaly, and trust that they can pass that knowledge to their peers, or their offspring, depending on their circumstances.

As an example, if my parents ever saw this they would either be amazed, stunned in disbelief, or attempt to smash it as "the work of the devil".


Not to label them as "simple folk" though, my Mum, as a young girl, was a radar operator during World War Two and my Dad could fix anything that ever broke (mainly our toys).

Same here.
My first watch was a manual wind Mickey Mouse watch. I learnt to wind it before I could properly read the time.
My dad had a manual wind watch which I think he may have bought after the war. He was a Wireless operator/Mid upper Air gunner on a Lancaster. He built his first Wireless from a kit when he was a kid(a crystal set). No auto/self tuning or auto winding back in those days.
If one wanted good TV reception, someone had to turn the Ariel around on top of the telly whenever the channel was changed and it was all trial and error with a dramatic change in reception when one let go of the Ariel so constant adjustment was required until it was optimised.
If one went to hospital, all the nurses wore a wind up watch on their uniform to use when taking a person's pulse when doing observations or timing the dosage of a drip.
The thermometers had Mercury in them, and a nurse could take your blood pressure the old school way without the machine doing it all for them.
If we didn't chop the wood for the stove, there were no cooked meals or hot water in our household so I learnt to chop wood safely around the same time I was learning to tell the time.
Our local high school was big on army cadets back in the day.
When I was small, i used to see the high schoolers going to school in their army cadet unfiorms carrying a 303.

And if you tried telling that to the youth of today. They wouldn't believe you.(The Four Yorkshiremen)😀
Edited:
 
Posts
886
Likes
471
When my grandmother bought me my first watch from a small town jeweler in Wisconsin in 1959 almost all watches were manuals, I needed no instruction. You pulled out the crown to set the time, and wound it up until the crown stopped every morning to keep it running. I saw my dad do that many times and a kid just knew how to use a watch. I still have the watch and it still runs.

With the internet and its massive amounts of data almost any simple activity can be discussed to the nth degree. In many cases we have lost the desire to figure out simple things for ourselves. We have become less independent.

Agreed.
It seems people can't just go and buy a watch based upon how it looks on the wrist.
They've got to research it on the net and obsess over half a mil here and 3/4 of a mil there and then weigh the watch and ponder if it will be too top heavy or too large or small or whether it's too dressy or casual.
 
Posts
1,776
Likes
4,256
Same here.
My first watch was a manual wind Mickey Mouse watch. I learnt to wind it before I could properly read the time.
My dad had a manual wind watch which I think he may have bought after the war. He was a Wireless operator/Mid upper Air gunner on a Lancaster. He built his first Wireless from a kit when he was a kid(a crystal set). No auto/self tuning or auto winding back in those days.
If one wanted good TV reception, someone had to turn the Ariel around on top of the telly whenever the channel was changed and it was all trial and error with a dramatic change in reception when one let go of the Ariel so constant adjustment was required until it was optimised.
If one went to hospital, all the nurses wore a wind up watch on their uniform to use when taking a person's pulse when doing observations or timing the dosage of a drip.
The thermometers had Mercury in them, and a nurse could take your blood pressure the old school way without the machine doing it all for them.
If we didn't chop the wood for the stove, there were no cooked meals or hot water in our household so I learnt to chop wood safely around the same time I was learning to tell the time.
Our local high school was big on army cadets back in the day.
When I was small, i used to see the high schoolers going to school in their army cadet unfiorms carrying a 303.

And if you tried telling that to the youth of today. They wouldn't believe you.(The Four Yorkshiremen)😀


Luxury.
 
Posts
477
Likes
495
Agreed.
It seems people can't just go and buy a watch based upon how it looks on the wrist.
They've got to research it on the net and obsess over half a mil here and 3/4 of a mil there and then weigh the watch and ponder if it will be too top heavy or too large or small or whether it's too dressy or casual.
Well, it’s kind of hard to find a SS Patek 5711 to try on then decide

lol