- Posts
- 7,743
- Likes
- 26,912
Tony C.
··Ωf Jury memberHe was selling a few last year, and I enquired about an Omega one, which he was asking a little over €11,000
They can be found for far less. Not cheap, mind you, but typically in the $5-7k range.
Very Rare Omega Calibre 30DP Observatory Chronometer on the bay
They can be found for far less. Not cheap, mind you, but typically in the $5-7k range.
- Posts
- 586
- Likes
- 765
Franco
·Are you referring to the spot at the red arrow?
If so, that has nothing to do with regulating the movement. That shows (for some reason) the cap jewel on one of the wheels in the movement. These are typically done on the balance, but could also be an escape wheel.
You are correct, for some reason I have always assumed (wrongly) it had some utilitarian meaning for ease of regulation. May be because it was in the region of the balance wheel. In the Peseux 260 - Ulysse Nardin is on the balance wheel.
Edited:
- Posts
- 8,890
- Likes
- 28,363
tyrantlizardrex
·They can be found for far less. Not cheap, mind you, but typically in the $5-7k range.
I spotted a couple run through auctions and came to a similar conclusion... still way beyond my pocket.
I've now moved on to lusting after Marine Chronometers - apparently I only need 5 or 6 per ship. 😁
- Posts
- 266
- Likes
- 1,070
Sharp
·I spotted a couple run through auctions and came to a similar conclusion... still way beyond my pocket.
I've now moved on to lusting after Marine Chronometers - apparently I only need 5 or 6 per ship. 😁
Chris, you'l also need a nice deck watch for each of your fleet 😗
- Posts
- 8,890
- Likes
- 28,363
tyrantlizardrex
·As if I need the encouragement! 😁
- Posts
- 4,292
- Likes
- 9,268
Bill Sohne
··Bill @ ΩFAs if I need the encouragement! 😁
Best
bill
- Posts
- 1,996
- Likes
- 1,226
DON
·It’s cool but 11k euro cool I don’t know about that, not sure what you’d really do with it other than try to make a glass case on a shelf for it or try to keep it on one of those mechanical winders as a weird desk clock maybe
Stick a dial on it and put it in a case and wear it. I've seen a number of comp movements re-cased and worn. If it can take a standard and available dial (or one on it fits a case). It can be converted
Be-ba with a Peseux 260
Kari Voutilainen with Longines 360
As a watch. Not going to run into anyone with the same due to limited numbers
DON
- Posts
- 21,625
- Likes
- 48,994
- Posts
- 2,026
- Likes
- 7,157
- Posts
- 5,398
- Likes
- 9,217
watchyouwant
·Shows me : ended. Unsold.....
- Posts
- 453
- Likes
- 1,302
Geezer
·The window in the dial is simply there to be able to check and ensure concentric and correct lubrication of the balance wheel cap jewel. Improper oiling could affect performance and of course this was especially important for competition chronometers.
You are correct, for some reason I have always assumed (wrongly) it had some utilitarian meaning for ease of regulation. May be because it was in the region of the balance wheel. In the Peseux 260 - Ulysse Nardin is on the balance wheel.
- Posts
- 3,817
- Likes
- 16,137
Fritz
·Maybe I’m missing something here, but wouldn’t an observatory movement have a precision regulator? This just looks like a bog standard 30 mm movement in an observatory case.
- Posts
- 16,728
- Likes
- 35,077
JimInOz
··Melbourne AustraliaMaybe I’m missing something here, but wouldn’t an observatory movement have a precision regulator? This just looks like a bog standard 30 mm movement in an observatory case.
Any fool can tweak a regulator.
It takes true horological expertise to produce a movement that doesn't even need one.
😉
- Posts
- 453
- Likes
- 1,302
Geezer
·The watchmakers working on these movements would spend most of their time making tiny adjustments to the balance wheel, hairspring and regulating pins (and possibly the escapement). All of this to get the watch to run perfectly in 6 or more positions, at different amplitudes and at various temperatures. While a fine regulator can be nice to adjust the average timing of the watch, it wouldn't make their life that much easier.
Maybe I’m missing something here, but wouldn’t an observatory movement have a precision regulator? This just looks like a bog standard 30 mm movement in an observatory case.
Edited:
- Posts
- 3,817
- Likes
- 16,137
