- Posts
- 6,713
- Likes
- 18,566
LouS
··Mrs Nataf's Other SonYes, that's a KonTiki bracelet combined with an anonymous GF clasp. I hope you did not pay anywhere near the $2600 ask.
UG Gay Freres End Links Guide
- Posts
- 5,842
- Likes
- 9,076
Mark020
··not the sharpest pencil in the ΩF drawerThanks! No I paid a fraction of that price.
- Posts
- 1,294
- Likes
- 2,291
jhross98
·i know this is an old thread. . but i am looking on definitive information on the following:
-What end links originally came with the Nina/Evil Nina?
-I have seen (in this thread) information that UP end links should fit the Nina. However, the Nina is 19mm and I have a pair of end links I believe are correct that do not fit--they are very close to 20mm
-Can anyone tell me what end links came on the Big Eye Unicompax ?
Any information greatly appreciated
And separately. . I am looking for a pair of UW end links which seems like a hopeless quest but if anyone knows of a pair. . .
Thank you
-What end links originally came with the Nina/Evil Nina?
-I have seen (in this thread) information that UP end links should fit the Nina. However, the Nina is 19mm and I have a pair of end links I believe are correct that do not fit--they are very close to 20mm
-Can anyone tell me what end links came on the Big Eye Unicompax ?
Any information greatly appreciated
And separately. . I am looking for a pair of UW end links which seems like a hopeless quest but if anyone knows of a pair. . .
Thank you
- Posts
- 38
- Likes
- 186
Jamey S
·i know this is an old thread. . but i am looking on definitive information on the following:
UW ends are original correct ends for Evil and Nina. And for the sister Tri-Compax Models from this era.
UP ends require minor filing in order to work as they are to wide. But profit is very close and they work well with some modification.
No idea on Big eye but others here will know.
UW ends are very hard to find. But they are out there. keep the faith
Jamey
-What end links originally came with the Nina/Evil Nina?
-I have seen (in this thread) information that UP end links should fit the Nina. However, the Nina is 19mm and I have a pair of end links I believe are correct that do not fit--they are very close to 20mm
-Can anyone tell me what end links came on the Big Eye Unicompax ?
Any information greatly appreciated
And separately. . I am looking for a pair of UW end links which seems like a hopeless quest but if anyone knows of a pair. . .
Thank you
- Posts
- 1,294
- Likes
- 2,291
jhross98
·thank you!
so UW for this one as well ?
so UW for this one as well ?
- Posts
- 38
- Likes
- 186
Jamey S
·
- Posts
- 1,294
- Likes
- 2,291
jhross98
·awesome
anyone know about the big eye unicompaxes ?
anyone know about the big eye unicompaxes ?
- Posts
- 1,294
- Likes
- 2,291
jhross98
·i tried the UP on a big eye-. . 20 but will need to be slightly shaved to fit. anyone know what the UP were originally made for ?
- Posts
- 257
- Likes
- 155
Moahunter
·Are there 2 variables in end link sizes?
!. The width.
2. The curvature (i.e. the case diameter).
Or is there a third, the distance between the spring bar and the nearest point on the case?
!. The width.
2. The curvature (i.e. the case diameter).
Or is there a third, the distance between the spring bar and the nearest point on the case?
- Posts
- 183
- Likes
- 329
Mapearso
·D defe79
I have these same "76" endlinks on a 19mm JB Champion bracelet. They do not fit the Evil Nina Compax well. They are not as long / tall as the correct UG endlinks and as a result there is a big gap between the endlinks and the case. The width of the endlinks and the fit between the lugs is fine
- Posts
- 1,294
- Likes
- 2,291
jhross98
·come on does no one know what the UP were originally made for ? or what came on the big eye unicompax (20mm) ?
thx
thx
- Posts
- 1,931
- Likes
- 22,749
- Posts
- 1,294
- Likes
- 2,291
jhross98
·well i can confirm that the UP do actually big the big eye unicompax. . without shaving. they did NOT fit a nina which is 19mm not 20mm
- Posts
- 1,294
- Likes
- 2,291
jhross98
·mean do actually "fit" the big eye unicompax
- Posts
- 7
- Likes
- 11
Mouflet54
·Hi everybody! I have a Polerouter fron 60' on a GF bracelet and i can read the letter "C" on the endlinks 👎? Possible? I read all this thread and never find something about this one? Thanks in advance. 😀
- Posts
- 1,175
- Likes
- 3,012
- Posts
- 433
- Likes
- 895
88cut
·Its an endlink for a Certina, they had similar bracelets.
- Posts
- 7
- Likes
- 11
- Posts
- 7
- Likes
- 11
- Posts
- 2,671
- Likes
- 24,903
