- Posts
- 2,555
- Likes
- 5,606
w154
·It’s a ladies Omega Geneve with an incorrect replacement crown (that I’d guess belongs on a “Services” watch).
Learn How To Fish
- Posts
- 325
- Likes
- 165
RoadRunner73
·I couldn't say better !
- Posts
- 1
- Likes
- 2
rdlkgliders
·This is yet another great thread.
I just joined after being a fan of Omega watches for years.
I recently was given my late fathers vintage Seamaster automatic and no very little about it.
I just joined after being a fan of Omega watches for years.
I recently was given my late fathers vintage Seamaster automatic and no very little about it.
- Posts
- 21
- Likes
- 11
Danimals
·Apologies if this was already covered and I missed it, but does anyone have some good advice and picture examples for what to look for (and look out for) when looking at the movement of the watch? I've been looking at a few vintage Seamasters but finding it difficult to determine if the internal movements are in good enough quality based on putting, scratches, discoloration, etc. Also, is the "amount" of service dates scratched into the case back a good way to judge the condition of the movement, or can that be misleading?
- Posts
- 1,568
- Likes
- 3,648
p4ul
·Apologies if this was already covered and I missed it, but does anyone have some good advice and picture examples for what to look for (and look out for) when looking at the movement of the watch? I've been looking at a few vintage Seamasters but finding it difficult to determine if the internal movements are in good enough quality based on putting, scratches, discoloration, etc. Also, is the "amount" of service dates scratched into the case back a good way to judge the condition of the movement, or can that be misleading?
When buying a vintage watch assumes it needs a service and add 200ish to the anticipated cost price you are paying.
UNLESS there is gold plated, guaranteed, bullet proof, written evidence that it has been serviced within the last 3-5 years, then you will need that 200 later!
- Posts
- 7,361
- Likes
- 58,708
Spruce
··Sunburst dial fanApologies if this was already covered and I missed it, but does anyone have some good advice and picture examples for what to look for (and look out for) when looking at the movement of the watch? I've been looking at a few vintage Seamasters but finding it difficult to determine if the internal movements are in good enough quality based on putting, scratches, discoloration, etc. Also, is the "amount" of service dates scratched into the case back a good way to judge the condition of the movement, or can that be misleading?
Some watchmakers mark and some don’t and there’s no way of telling. The best practice is to ask the seller and if he says it has been ask who by and for proof by receipt. Some sellers just get their nephews (😉) to waft a can of WD40 near the watch, polish the case and fit a new cheap strap.
If the answer is no, perfectly proper to ask for an additional discount. Be suspicious of ‘no returns’.
And finally …. AFTER you’ve done your own due diligence and think the watch and the price might be okay, but BEFORE you buy post here on OF, with good photos, your assessment and details of the price and some or all of OF will chip in to with views.
Also, as posted earlier, check out the OF Private Sales thread. Good luck.
- Posts
- 3,460
- Likes
- 7,951
UncleBuck
··understands the decision making hierarchyI have a Belgian friend, Danny, that has a business "Danimals", is this you, my friend?
Jim from Bonaire
Jim from Bonaire
- Posts
- 21
- Likes
- 11
Danimals
·Okay great, thanks for the advice! So sounds like assuming the movement looks decent enough and is operating, a good service should get it to keep good time? Will post anything for feedback as well!
And unfortunately not Jim, I'm in the US!
And unfortunately not Jim, I'm in the US!
- Posts
- 325
- Likes
- 165
RoadRunner73
·As stated earlier, a service by a reliable watchmaker if your choice is the best way for you to be sure that the movement has been checked and properly looked after ; he'll tell you exactly what he has found and done. Same when I buy a vintage Harley : my mechanics will systematically change all the engine fluids, the fork oil, and will do a 100% check of the whole bike as this is also safety related.
Back to a watch movement, I personnally avoid the movements whose holding screws are scratched, as it may indicate that the watch hasn't been properly looked after. But then it's down to whether you are hunting the lower or the higher end of the value range of a specific model.
Back to a watch movement, I personnally avoid the movements whose holding screws are scratched, as it may indicate that the watch hasn't been properly looked after. But then it's down to whether you are hunting the lower or the higher end of the value range of a specific model.
- Posts
- 477
- Likes
- 661
eternalover
·Check the learn how to fish as I think there is stuff there.
Anyway my two pennys - I always look at all the screws that are visible and try to decide are they in good condition and consistent with the rest of the watch e.g. the rotor+ general condition. If they all look brand new for me it is as bad as being scratched or damaged due to clumsy efforts or being frozen and forced and maybe replaced. Interested in other views.
Anyway my two pennys - I always look at all the screws that are visible and try to decide are they in good condition and consistent with the rest of the watch e.g. the rotor+ general condition. If they all look brand new for me it is as bad as being scratched or damaged due to clumsy efforts or being frozen and forced and maybe replaced. Interested in other views.
- Posts
- 21
- Likes
- 11
Danimals
·
- Posts
- 7,361
- Likes
- 58,708
Spruce
··Sunburst dial fanYou should probably remove your post from this thread and repost it in your original enquiry thread 😀
- Posts
- 21
- Likes
- 11
- Posts
- 2
- Likes
- 1
andrewgzz
·Hi there! I just wanted to share a resource I have been putting together for months, collecting and categorizing pictures of original dials discussed/spotted online
This is a non-commercial public effort, so just pasting the link here in case it is helpful to someone https://www.vintagedial.com/
It is hard to be exhaustive given all the different types of dials, but at least it an organized starting point for reference 😀
This is a non-commercial public effort, so just pasting the link here in case it is helpful to someone https://www.vintagedial.com/
It is hard to be exhaustive given all the different types of dials, but at least it an organized starting point for reference 😀
- Posts
- 33
- Likes
- 56
Lorenzzzz
·G GSbyCan I ask if this went through re-dial or retouch? I notice that this dial only “swiss” and not “swiss made”. Most of the examples I find on the internet is “swiss made”.
