Found a Seamaster... Fake, real?

Posts
37
Likes
13
Hello everyone I just found this I would see master in the watch collection that comprises mostly of Jacques Lemans and fake Breitlings and other watches from Esprit etc.

But this one caught my attention.

Diameter 34.2mm, lug width 18mm



Definitely in need of a watch service

What do you think of it, real, fake, value? What is it exactly, the back cannot be opened


Thank you for your expertise!
 
Posts
17,939
Likes
37,514
It's Genuine. All oooks original.
The back cannot be opened as the movement is installed through the front by removing the crystal/bezel.
 
Posts
13,198
Likes
22,952
Unserviced from an unknown private seller, probably £450ish
 
Posts
178
Likes
51
Even has the omega crystal logo in the middle of the crystal
 
Posts
178
Likes
51
Yep, except for the scratch in the watchface...😟
Could just be the crystal, can't easily see from photos
 
Posts
1,434
Likes
6,513
I am not any kind of expert but that's a nice looking watch: the depth of the chrome, the cleanliness of the dial....
 
Posts
37
Likes
13
I acquired the piece... It is in dire need of a service, though

Now does anyone know which buckle and box might fit this vintage?
 
Posts
37
Likes
13
Question for the pros:
I will have it serviced, but should I have the case refinished or should I leave it as it is? Looks worse on the picture than in reality.
 
Posts
1,981
Likes
2,144
Question for the pros:
I will have it serviced, but should I have the case refinished or should I leave it as it is? Looks worse on the picture than in reality.
Based on the pictures, it looks like it could just benefit from a few minutes with a cape cod polishing cloth.

That said, most watchmakers do case work. I tend to ask for a 'very light' polish, which is the bare minimum to make it 'look good'. A polish can very much risk making it look WORSE by breaking up the lines, and softening the features.

If it were me, I'd spend a little bit of a time with a cape cod cloth (its a brand of cloth they sell with a very mild polishing compound in it, made for silverware!), and see if I could get it to a point that I'd be happy before letting anyone with powertools at it.
 
Posts
846
Likes
2,697
You should not polish it. Every time you lose a little lug definition. Jeweler's cloth is the max you should go for. IMO.

Great watch. Thanks for sharing.
 
Posts
6
Likes
13
I'm not a collector or anything but that's a sharp looking watch. I have one with a similar case from a little later, also marked de ville. I'm planning to keep the wear on the case for my own, the case being imperfect tells the history.
 
Posts
24,246
Likes
53,991
The gradual loss of case sharpness through polishing is generally a one-way process, so I would generally err on the side of leaving it alone. If you find that the little swirls and dings are intolerable, you can always have it polished in the future.
 
Posts
37
Likes
13
Thank you for your expertise, so it will be cleaning, new gaskets, and a revision of the movement.