- Posts
- 211
- Likes
- 574
Javi22
路馃槈 Bad Soden ist immer eine Reise wert, Montags ist er nicht da, aber vorher anrufen kann nix schaden.
Daddy's so proud....(and a question on servicing a 1967 .321)
- Posts
- 222
- Likes
- 621
siguzzi
路you can also go to Robin Israel
www.uhrenkunde.de
www.uhrenkunde.de
- Posts
- 1,852
- Likes
- 3,591
Dash1
路you would never want to buy a car that had not been serviced regularly, however the reverse tends to be true with vintage watches - the more services they have had in the past the more undesirable they become! Due, of course, to having so many parts swapped out, heavy polishing and often poor watchmaking.
By the way if you're going to wear it on a NATO strap be sure to fit a case back sticker.
By the way if you're going to wear it on a NATO strap be sure to fit a case back sticker.
- Posts
- 169
- Likes
- 825
Felice79
路Thanks everyone! Now i have a lot of good addresses to have my speedy serviced. Already had a small watchmaker "sound the corner" check it and put some oil on the right spots...he said i should be fine for the next years, but i'll ask a specialist just to make sure.
THANKS again, what a great forum.
THANKS again, what a great forum.
- Posts
- 2,200
- Likes
- 7,264
smitty190373
路Thanks everyone! Now i have a lot of good addresses to have my speedy serviced. Already had a small watchmaker "sound the corner" check it and put some oil on the right spots...he said i should be fine for the next years, but i'll ask a specialist just to make sure.
THANKS again, what a great forum.
Did anything ever come of the Omega parts you were going to look at ? Cheers.
- Posts
- 504
- Likes
- 426
ibis888
路Beautiful watch, enjoy!
- Posts
- 169
- Likes
- 825
Felice79
路Did anything ever come of the Omega parts you were going to look at ? Cheers.
I was lucky enough to get two dials and some small parts for my speedy...馃槈
He is a great guy and i will keep in contact. If he ever asks me for help, i will let this forum know.
Cheers...
- Posts
- 169
- Likes
- 825
- Posts
- 169
- Likes
- 825
Felice79
路Did anything ever come of the Omega parts you were going to look at ? Cheers.
- Posts
- 2,200
- Likes
- 7,264
smitty190373
路Wow, great picture, a proper Aladdins cave there i'm sure! At least you managed to get a few bits. Well done.
- Posts
- 28,097
- Likes
- 71,781
Archer
路路Omega Qualified WatchmakerThanks everyone! Now i have a lot of good addresses to have my speedy serviced. Already had a small watchmaker "sound the corner" check it and put some oil on the right spots...he said i should be fine for the next years, but i'll ask a specialist just to make sure.
THANKS again, what a great forum.
If the guy around the corner added new oil to pivots without first disassembling and cleaning the movement, you will want to get it serviced sooner rather than later. Adding new oil to a dirty watch makes a fine grinding paste for the pivots...
- Posts
- 169
- Likes
- 825
Felice79
路If the guy around the corner added new oil to pivots without first disassembling and cleaning the movement, you will want to get it serviced sooner rather than later. Adding new oil to a dirty watch makes a fine grinding paste for the pivots...
- Posts
- 535
- Likes
- 1,270
