Community Stories

Wittnauer Electro-Chron

galaxytime
Posts
259
Likes
719
The original battery for this watch is no longer available so we machined a brass plate to fit inside the case back with a diameter hole that fits a 395 battery. We had some difficulty at first as the brass plate came in contact with the negative battery contact causing a short. We kept machining the brass insert down until it no longer made contact but in hindsight, we could have machined the same piece out of plastic or made a thin plastic disc to fit inside the brass recession. Just wanted to share our idea with some pics and look forward to the comments. I've seen some with a cardboard cut disc which also works fine but we wanted something that looked a little more aesthetically pleasing.

Cheers!
 
IMG_8247.JPG IMG_8266.JPG IMG_8263.JPG IMG_8262.jpg IMG_8185.JPG IMG_8186.JPG IMG_8253.jpg IMG_8251.JPG IMG_8254.JPG IMG_8255.JPG IMG_8257.JPG IMG_8258.JPG IMG_8260.JPG IMG_8261.JPG
DaveK
Posts
4,980
Likes
15,243
The batteries I buy for my Accutron all come with those plastic gaskets

Edit: Great looking 12:00 marker on that watch
 
galaxytime
Posts
259
Likes
719
I wish it had these hands though. That would really make the watch. Does anyone know if these hands were made in yellow?

img_5844-jpeg.1647138
 
Larry S
Posts
13,158
Likes
52,287
It’s a great looking watch nontheless. Good on you for bringing it back from the dead.
 
galaxytime
Posts
259
Likes
719
kpaxsg kpaxsg
@galaxytime nice. did you make extra? i would like to try as well.
We certianly could. I was once again thinking about plastic but something just doestn't feel right about that.
 
galaxytime
Posts
259
Likes
719
DaveK DaveK
The batteries I buy for my Accutron all come with those plastic gaskets

Edit: Great looking 12:00 marker on that watch
It was the edge of the brass touching the screw and or outer edge of the brass battery contact. We had to machine back until it no longer made contact and then it actually worked when the back was tightened. YAY!!!
Witt movement.JPG Witt battery holder.JPG
 
DaveK
Posts
4,980
Likes
15,243
I admire that work 👍
 
Waltesefalcon
Posts
3,536
Likes
9,597
It would probably be worth while to make a casting and make some of these in plastic.

I know that if I owned one of these watches I would want one.
 
dinglem
Posts
87
Likes
447
galaxytime galaxytime
We certianly could. I was once again thinking about plastic but something just doestn't feel right about that.
Hi galaxytime - I would certainly be interested in one of these if you are making them available to others? I just started a post about it and was directed to your thread. I don't like the thought of leaving a scruffy piece of cardboard in mine!

thumbnail_IMG_2263.webp
 
galaxytime
Posts
259
Likes
719
dinglem dinglem
Hi galaxytime - I would certainly be interested in one of these if you are making them available to others? I just started a post about it and was directed to your thread. I don't like the thought of leaving a scruffy piece of cardboard in mine!

thumbnail_IMG_2263.webp
Sorry for the late reply. I just sent you a PM.
 
Sign up or log in to reply...

Similar threads

dinglem

Wittnauer Electric - battery spacer

dinglem Other Watch Brands Forum
rendo
rendo
Posts
2
Views
533
N

50s Wittnauer Chronograph Ref. 3256 Venus 188

Nomasdad84 Longines Watches
yonlo
yonlo
Posts
3
Views
2K
KeyWestPaw

Omega Electronic F300Hz Geneve Chronometer 198.030

KeyWestPaw Private Watch Sales
KeyWestPaw
KeyWestPaw
Posts
1
Views
4K
Barking mad

Stunning Wittnauer 7004A Chronograph

Barking mad Private Watch Sales
Barking mad
Barking mad
Posts
10
Views
7K
kpaxsg

Vintage Wittnauer 14A Model 3525 Valjoux 7733 Chronograph Men's Watch 40 mm

kpaxsg Private Watch Sales
kpaxsg
kpaxsg
Posts
3
Views
4K
Thommas

Wittnauer 4000 Skin Diver

Thommas Private Watch Sales
Dr.Sascha
Dr.Sascha
Posts
7
Views
6K