- Posts
- 518
- Likes
- 5,198
Travelller
·Thought I'd share my two Ed Whites on this Sunday morning...
Speedmaster Caliber 321 "Ed White" - A Pictorial Review
- Posts
- 82
- Likes
- 240
- Posts
- 1,316
- Likes
- 2,460
64Wing
·Happy #SpeedyTuesday!
- Posts
- 2
- Likes
- 1
Speedster65
·Hi, this might be a bit silly question but are the lugs a bit “uneven” and not aligned in this 321 Ed White? I purchased mine few months back and now looking these pics here I started to wonder whether mine has been polished…
Not that it looks like polished, but the tips of the lugs just are not identical in each corner. The left lug (where the pushers are) looks it slightly leans more towards to bezel side.
Not that it looks like polished, but the tips of the lugs just are not identical in each corner. The left lug (where the pushers are) looks it slightly leans more towards to bezel side.
Edited:
- Posts
- 518
- Likes
- 5,198
Travelller
·Hi, this might be a bit silly question but are the lugs a bit “uneven” and not aligned in this 321 Ed White? I purchased mine few months back and now looking these pics here I started to wonder whether mine has been polished…
Not that it looks like polished, but the tips of the lugs just are not identical in each corner. The left lug (where the pushers are) looks it slightly leans more towards to bezel side.
As long as the bevels are generally crisp everywhere else I wouldn't worry about it 👍
*Mine are not perfectly symmetrical either...
- Posts
- 2
- Likes
- 1
Speedster65
·It’s really tough to catch with iPhone and the watch is supershiny, but I’ll try again 😀
So when you look at the (top side) flat tip of the lug (the one on the side of the chrono buttons), it looks like it “leaning” towards to bezel direction. So I’m just wondering if it has been banged to somewhere since there is slight ding in bezel on the same side 😀
What I looked at pics in internet, it looks like these are not symmetrical (like in your pic too, but that’s from the bottom lugs) or “sports Rolex sharp”. I can still return the watch, so that’s why I’m puzzled what to do 👎
So when you look at the (top side) flat tip of the lug (the one on the side of the chrono buttons), it looks like it “leaning” towards to bezel direction. So I’m just wondering if it has been banged to somewhere since there is slight ding in bezel on the same side 😀
What I looked at pics in internet, it looks like these are not symmetrical (like in your pic too, but that’s from the bottom lugs) or “sports Rolex sharp”. I can still return the watch, so that’s why I’m puzzled what to do 👎
Edited:
- Posts
- 518
- Likes
- 5,198
Travelller
·...still the one 🥰
- Posts
- 114
- Likes
- 294
Indices
·Hi, this might be a bit silly question but are the lugs a bit “uneven” and not aligned in this 321 Ed White? I purchased mine few months back and now looking these pics here I started to wonder whether mine has been polished…
Not that it looks like polished, but the tips of the lugs just are not identical in each corner. The left lug (where the pushers are) looks it slightly leans more towards to bezel side.
As I’m aware and I find it quite interesting is that they used Eugene Cernan’s watch for the tomography for this model: of which the case had some “mistakes” in finish- especially along the chamfers of the lugs which likely would have occurred during servicing.
- Posts
- 518
- Likes
- 5,198
Travelller
·
p.s. - pic of the 321, the new SpeedyTuesday Cap & yours truly 😀
- Posts
- 56
- Likes
- 127
WatchPer
·Nice review thanks
- Posts
- 50
- Likes
- 114
Chachi
·
- Posts
- 518
- Likes
- 5,198
Travelller
·How do you like the 321?
- Posts
- 518
- Likes
- 5,198
Travelller
·#SpeedyTuesday! 
- Posts
- 4
- Likes
- 1
Twistytwik
·I love movements like these and honestly omega are very strong on their performance in terms of movements
- Posts
- 209
- Likes
- 383
Dimitar Adamski
·Great review and photos. Why did they stop 321?
- Posts
- 1
- Likes
- 1
meravicci
·What an epic review of the omega speedy! @Travelller
