- Posts
- 173
- Likes
- 156
zkramez
·Does anyone know how to align this? Is there a way to do it?
When I hit the reset button this is where it ends up.
When I hit the reset button this is where it ends up.
Speedmaster 861 Chrono Alignment
- Posts
- 2,176
- Likes
- 4,349
SOG53
·Needs to be fixed at service no tricks to fix on your own that I know
- Posts
- 5,293
- Likes
- 24,471
YY77
·Long press top pusher, double press bottom pusher whilst doing the hokey pokey.
J/k, take it to watchmaker is my advice.
J/k, take it to watchmaker is my advice.
- Posts
- 1,107
- Likes
- 3,231
bsowers34
·Yeah, unfortunately it's broke.
Quartz are easy to do, these need a watchmaker.
Quartz are easy to do, these need a watchmaker.
- Posts
- 173
- Likes
- 156
zkramez
·When I use the chrono and reset it, it will jump ever so slightly to an even worse position.
- Posts
- 21,735
- Likes
- 49,325
Dan S
·If it's not always resetting to the same location, it may require more than a simple adjustment.
- Posts
- 14,603
- Likes
- 42,303
Canuck
·If you’ve had it serviced in the past, this might be a warranty adjustment. Worth a thought.
- Posts
- 173
- Likes
- 156
- Posts
- 173
- Likes
- 156
- Posts
- 28,037
- Likes
- 71,565
Archer
··Omega Qualified WatchmakerWhen I use the chrono and reset it, it will jump ever so slightly to an even worse position.
- Posts
- 173
- Likes
- 156
zkramez
·If the position it stops at is changing each time you reset, the first thing that comes to mind is that the hand is not tight on the post. If it's due for a service anyway, having that done is a good idea, and this issue would be resolved during the service. The tube of the hand can be tightened...
