Omega Seamaster Professional 36mm Jaques Mayol Limited 2553.41

Posts
84
Likes
80
Picked up this Omega SMP 36.25mm Jaques Mayol in green wave dial.
Is this watch really rare or sought after? or it's just like any other seamaster professional?

End links seem to be a replacement without the 823 etched

 
Posts
4,686
Likes
11,826
It's a nice watch, but not too hard to find. Congrats on the new piece!
 
Posts
27,797
Likes
70,610
Serial number: 60148974
Article ref: 25534100

Like it - nice score.
 
Posts
7,618
Likes
21,838
I’ve been tempted by one too, congrats. I don’t think they’re rare but I like their look.
 
Posts
84
Likes
80
thanks!! i really checked thoroughly to make sure it is not fake and hopefully i didnt make a mistake haha
 
Posts
84
Likes
80
I’ve been tempted by one too, congrats. I don’t think they’re rare but I like their look.
really?, i had a hard time looking for that's not overly expensive in the market just to cross check
 
Posts
84
Likes
80
btw, do we consider 1996 watches vintage now or modern? damn, time flies so fast it goes from modern to vintage, next thing we know co-axials will be vintage already
 
Posts
9,865
Likes
15,502
Well I've never seen one before so yes I'd say it's pretty rare. It is in the 36mm mid size though which is not a plus. I'd suggest it is certainly more desirable than the std blue dial middy, but perhaps still less so than a full size blue dial model. I'm speaking in objective market terms, I realise that for some the mid size is the one to go for. There are aftermarket end bracelets and end links out there, but I suspect these are fine. There were variations over the years. To get best value for an LE like this you really need the full set. If it is missing box and papers that would be a big drag on value. Much more so than with a non limited piece. On an LE, b&p can add or subtract as much as 30% in my experience.

Regarding modern or vintage, I see the SMP family as modern but note yours has tritium dial lume so from one POV could indeed be considered vintage.
Edited:
 
Posts
84
Likes
80
Well I've never seen one before so yes I'd say it's pretty rare. It is in the 36mm mid size though which is not a plus. I'd suggest it is certainly more desirable than the std blue dial middy, but perhaps still less so than a full size blue dial model. I'm speaking in objective market terms, I realise that for some the mid size is the one to go for. There are aftermarket end bracelets and end links out there, but I suspect these are fine. There were variations over the years. To get best value for an LE like this you really need the full set. If it is missing box and papers that would be a big drag on value. Much more so than with a non limited piece. On an LE, b&p can add or subtract as much as 30% in my experience.

Regarding modern or vintage, I see the SMP family as modern but note yours has tritium dial lume so from one POV could indeed be considered vintage.
I was also having doubts about the bracelet actually, the inside clasp has a 1501/823 reference, which is 1501 with 823 endlinks, but it was not engraved as I have seen on some but lightly engraved or maybe printed i don't know
 
Posts
1,999
Likes
3,368
Love the green wavy dial, it looks great. I tried a midsize a while ago and I liked the fit, it’s not too small at all. Not sure if I prefer this or the blue… Is there a turquoise? 😜
 
Posts
84
Likes
80
Love the green wavy dial, it looks great. I tried a midsize a while ago and I liked the fit, it’s not too small at all. Not sure if I prefer this or the blue… Is there a turquoise? 😜
have not seen a turquoise.. there are other jaques mayol limited , like in 1999 i think, but it was blue maybe a different shade of blue, the thing is, those jaques mayol does not have escapements, so are those really necessary?
 
Posts
9,865
Likes
15,502
I was also having doubts about the bracelet actually, the inside clasp has a 1501/823 reference, which is 1501 with 823 endlinks, but it was not engraved as I have seen on some but lightly engraved or maybe printed i don't know

Prob just had a new clasp at some point, not uncommon. I don’t think it’s anything to worry greatly about. The fake end links seem to be solid on top rather than segmented and aren’t as crisp as those usually in my experience. I’ve no idea what you mean about escapements, do you mean the other Mayol watches are quartz? There were SM120m and earlier Calypso models with tie ups to him too.
 
Posts
690
Likes
2,557
I’ve no idea what you mean about escapements,
Probably no HEV, which is good point, I had not noticed
 
Posts
84
Likes
80
Probably no HEV, which is good point, I had not noticed
yup sorry , yes helium escape valve , that's what I meant, those jaques mayol verions doesn't have them
 
Posts
84
Likes
80
Prob just had a new clasp at some point, not uncommon. I don’t think it’s anything to worry greatly about. The fake end links seem to be solid on top rather than segmented and aren’t as crisp as those usually in my experience. I’ve no idea what you mean about escapements, do you mean the other Mayol watches are quartz? There were SM120m and earlier Calypso models with tie ups to him too.
I meant HEV, redzer007 was right 😀 , it's automatic, cal 1120 which i believe is an ETA 2982 or something



the endlinks of this just looked different and without the etched 823

the image below is what i got from google

 
Posts
9,865
Likes
15,502
To repeat myself, it was probably replaced at some point due to failure. The sliding clasp is not the toughest out there and they get bent and scratched up pretty badly pretty quickly. The watch is from the mid 1990s. The clasp isnt, it is later. I've actually changed one myself on a similar model. Not a disaster. Have you still got the gold inlaid Omega badge on the clasp? If its been changed maybe you don't any more.

I'm not a huge fan of the HEV either. I will now go away and look to see if this had a full size big brother with a similar setup but I suspect it doesn't. JM was presumably very slight and all his tie up watches are on the small side.

Here is an idea of the market value, it is as I thought it seems:

https://watchcharts.uk/watch_model/169-omega-seamaster-midsize-jacques-mayol-2553-41/overview
Edited:
 
Posts
84
Likes
80
To repeat myself, it was probably replaced at some point due to failure. The SMP clasp is not the toughest out there and they get scratched up pretty badly pretty quickly. The watch is from the mid 1990s. The clasp isnt, it is later. Not a disaster.

I'm not a huge fan of the HEV either. I will now go away and look to see if this had a full size big brother with a similar setup but I suspect it doesn't. JM was presumably very slight and all his tie up watches are on the small side.
well that's most likely what happened.

No it doesn't have a full sized 41mm version unfortunately.
 
Posts
84
Likes
80
well that's most likely what happened.

No it doesn't have a full sized 41mm version unfortunately.
just came across this thread


the 1501/823 number 62 bracelet belonged to a two toned bracelet, and the 1501/823 number 32 is the stainless steel, now it all makes sense. probably it is a put up together bracelet and clasp from different bracelets.

Not a disaster but learned something new
 
Posts
9,865
Likes
15,502
just came across this thread


the 1501/823 number 62 bracelet belonged to a two toned bracelet, and the 1501/823 number 32 is the stainless steel, now it all makes sense. probably it is a put up together bracelet and clasp from different bracelets.

Not a disaster but learned something new
Do you have a gold inlaid clasp Omega badge? I'm not sure about the theory in that link you show. 32 and 62 are clasp numbers and don't really relate to the main body of the bracelet. Both kinds use the same clasp in fact. See my link I added above, the bracelet should be all steel with gold clasp inlay. If you have a gold inlay, I don't see anything amiss despite you seeming to be convinced there is...
Edited: