- Posts
- 16,830
- Likes
- 35,260
JimInOz
··Melbourne AustraliaIf I win the lottery that is.
Best watched in full screen.
Best watched in full screen.
Holy Crap - I want one of these!
- Posts
- 580
- Likes
- 1,829
TDBK
·Impressive! And while it's a nice bit of coin—you can get a pretty decent car for the price—it wasn't as much as I expected: Omega sells some steel-on-leather watches for more (although not many).
- Posts
- 3,700
- Likes
- 6,297
Vercingetorix
··Spam RiskCertified explosion proof guarantee? Let us hope so.
- Posts
- 1,362
- Likes
- 17,516
KeithS
·Wouldn’t the spinning damage the delicate components of a watch movement?
- Posts
- 488
- Likes
- 707
Ninja2789
·They had me at “Certified EXPLOSION PROOF GUARANTEED”.
- Posts
- 28,164
- Likes
- 72,128
Archer
··Omega Qualified WatchmakerWouldn’t the spinning damage the delicate components of a watch movement?
No - most automated cleaning machines spin the parts baskets both during the cleaning cycle, and in between solutions to spin off the excess, then again during the drying cycle.
It's a cool machine, but not cheap and I've not yet seen anything published that shows it cleans better than a traditional automated machine. My machine uses simple limit switches, mechanical timers, etc so I know it can be repaired easily when the time comes...this one, not so much.
- Posts
- 16,830
- Likes
- 35,260
JimInOz
··Melbourne Australia......................My machine uses simple limit switches, mechanical timers, etc so I know it can be repaired easily when the time comes...this one, not so much.
Interested in your machine Al. What are you using?
Also, what brand fluids do you use? Any preferences?
- Posts
- 28,164
- Likes
- 72,128
Archer
··Omega Qualified WatchmakerInterested in your machine Al. What are you using?
Also, what brand fluids do you use? Any preferences?
RM90. I use L&R solutions, so I use Extra Fine watch cleaner, and #3 Rinse for the rinse jars.
When I went for training at Omega, they used Zenith solutions, and I did try them, but the rinse would never dry properly, and I didn't find them as effective as the L&R solutions.
- Posts
- 7,797
- Likes
- 27,108
Tony C.
··Ωf Jury memberMy machine uses simple limit switches, mechanical timers, etc so I know it can be repaired easily when the time comes...this one, not so much.
I ain't no watchmaker, but this rings very true, and is precisely why the "newest" car that I have owned is my current 2010 Audi A3. Of course cars were much simpler well before 2010, and easier for owners to repair themselves, but today's over-engineered and computerized cars are, in this context, ridiculous.
- Posts
- 16,830
- Likes
- 35,260
JimInOz
··Melbourne AustraliaRM90. I use L&R solutions, so I use Extra Fine watch cleaner, and #3 Rinse for the rinse jars.
When I went for training at Omega, they used Zenith solutions, and I did try them, but the rinse would never dry properly, and I didn't find them as effective as the L&R solutions.
True. I find the Zenith Drizebrite (?) tends to leave spots on the jewels, so I've changed my procedure to include a fourth rinse in ethanol and it's much better after drying.
I've got a consignment of L&R Ultrasonic Cleaner and Rinse on the way so It'll be interesting to see the difference.
There were a couple of articles on the RM90 on the web, and I even found on for sale on eBay (in the US 😡).
It may be superseded now, but when you compare it to the HUGE Elmasolvex, I saw a video of Swiss Time Services using one of their THREE units, they're the size of a beer keg!
I think the RM90 is a better unit, especially for the reasons you mentioned.
- Posts
- 28,164
- Likes
- 72,128
Archer
··Omega Qualified WatchmakerI'm sure the new Elma unit is a fine machine, but if I'm going to invest in my shop, this would not be my first choice.
If I was going to upgrade my machine, I would probably opt for the ACS 900:
http://greinervibrograf.com/?pageID=41&lng=en
But if I really had my way, I would find some of the machines I used in school - Tempo 400's.
Not the best video - just one I found. What I like about this machine is the smaller amount of solutions in each jar compared to others machines. It means you can change solutions more often without being as wasteful. They can be found, but often not in working condition...
If I was going to upgrade my machine, I would probably opt for the ACS 900:
http://greinervibrograf.com/?pageID=41&lng=en
But if I really had my way, I would find some of the machines I used in school - Tempo 400's.
Not the best video - just one I found. What I like about this machine is the smaller amount of solutions in each jar compared to others machines. It means you can change solutions more often without being as wasteful. They can be found, but often not in working condition...
