Community Stories

Help with removing stem from Omega Seamaster Professional 200m Ref 396.1062

A
Posts
3
Likes
0
I am wanting to change the case tube and don't know the process. I read that a screw needs to be turned about 3/4 of a turn and then pressed down to remove it. There are a couple of screws and there is an arrow, tried the one next to the arrow... nothing. So, which screw to turn and to release the stem?
 
JimInOz
Posts
18,128
Likes
37,832
The screw you undo is the one the arrow points to.
If you've undone it 3/4 of a turn an pressed down on the screw head firmly while pulling on the stem and it doesn't disengage, turn the screw another 1/4 turn and try again. If it still won't release use tiny "undo" movements on the screw and make sure you're pressing down firmly on the screw head.
 
A
Posts
3
Likes
0
JimInOz JimInOz
The screw you undo is the one the arrow points to.
If you've undone it 3/4 of a turn an pressed down on the screw head firmly while pulling on the stem and it doesn't disengage, turn the screw another 1/4 turn and try again. If it still won't release use tiny "undo" movements on the screw and make sure you're pressing down firmly on the screw head.
Thank-you for updating my thread and the guidance!
 
Sign up or log in to reply...

Similar threads

A

Help with removing back wind crown

Abs1 Vintage Omega Watches Help, Discussion and Advice
A
Abs1
Posts
6
Views
2K
O

Please Help!! Is this OMEGA Seamaster PROFESSIONAL 200M Cal 1438 Ref 396.1052 genuine or replica?

omegavintageman Open Discussion
guwipa
guwipa
Posts
15
Views
13K
Nlytnone

Help with removing 302 from case.

Nlytnone Longines Watches
ChrisN
ChrisN
Posts
9
Views
2K
Nlytnone

Help with removing 302 from case.

Nlytnone Longines Watches
JimInOz
JimInOz
Posts
2
Views
957
Darlinboy

Help with removing winding and alarm stems... JLC desk clock

Darlinboy Open Discussion
Darlinboy
Darlinboy
Posts
2
Views
864