Community Stories

Does a trip to the service center include water resistant checks?

Goseki
Posts
31
Likes
10
I had sent my seamaster NTTD in to have the caseback realigned and seals checked. It came back within a month. The naiad caseback is now realigned, and no gaskets were returned with it so the AD said that meant everything was still good. Do they automatically test the 300m water resistance as well and would there any documentation of that? Just wanted to be sure before I take the watch into deep waters.
 
Speed2Sea
Posts
508
Likes
2,289
Not sure about the test, but how can a case back become out of alignment?
 
Goseki
Posts
31
Likes
10
Speed2Sea Speed2Sea
Not sure about the test, but how can a case back become out of alignment?
Long story short, ebay authenticators.
 
YY77
Posts
5,291
Likes
24,444
If they don't forget, this one (not mine) which was sent to the JLC service center to have the seconds hand changed, was posted on a local forum:

1742672317734.webp
 
Goseki
Posts
31
Likes
10
YY77 YY77
If they don't forget, this one (not mine) which was sent to the JLC service center to have the seconds hand changed, was posted on a local forum:

1742672317734.webp
Yikes, that's scary
 
Evitzee
Posts
7,075
Likes
13,183
A naiad cashback should always be in the same position when rnstalled. Not sure why it had to be sent in to be realigned.
Edited:
 
Goseki
Posts
31
Likes
10
Evitzee Evitzee
A naiad cashback should always be in the same position when rnstalled. Not sure why it had to be sent in to be realigned.
Bad authenticator
 
ErichPryde
Posts
3,160
Likes
6,297
YY77 YY77
If they don't forget, this one (not mine) which was sent to the JLC service center to have the seconds hand changed, was posted on a local forum:

1742672317734.webp

Big oooooof.
 
Larry S
Posts
13,154
Likes
52,275
YY77 YY77
If they don't forget, this one (not mine) which was sent to the JLC service center to have the seconds hand changed, was posted on a local forum:

1742672317734.webp
Was that the US service center?
 
Archer
Posts
28,025
Likes
71,533
Yes, it would have had pressure testing done to it if it was a proper Omega service center.

Evitzee Evitzee
A naiad cashback should always be in the same position when rnstalled. Not sure why it had to be sent in to be realigned.
The case back can be installed in 3 different places, and only one results in the correct alignment.
 
Goseki
Posts
31
Likes
10
Archer Archer
Yes, it would have had pressure testing done to it if it was a proper Omega service center.


The case back can be installed in 3 different places, and only one results in the correct alignment.
Good to know. The AD said they sent it to the service center in Switzerland. Does it normally come back with the paper slip with the results of the pressure test?
 
Evitzee
Posts
7,075
Likes
13,183
Archer Archer
The case back can be installed in 3 different places, and only one results in the correct alignment.
Thanks for that clarification, but that shows really bad attention to details by the e Bay authenticator. Personally, I've bought various watches off eBay in the past but this authenticator policy stops me dead now, who wants their purchase to be monkeyed around by some desk jockey with a caseback opener? There are plenty of other venues to buy/sell.
 
Goseki
Posts
31
Likes
10
Evitzee Evitzee
Thanks for that clarification, but that shows really bad attention to details by the e Bay authenticator. Personally, I've bought various watches off eBay in the past but this authenticator policy stops me dead now, who wants their purchase to be monkeyed around by some desk jockey with a caseback opener? There are plenty of other venues to buy/sell.
Yup, I will no longer purchase any expensive watches through eBay because of this.
 
Goseki
Posts
31
Likes
10
Archer Archer
The case back can be installed in 3 different places, and only one results in the correct alignment.

Do you happen to know what the 3 positions are?
 
Dan S
Posts
21,730
Likes
49,311
Goseki Goseki
Do you happen to know what the 3 positions are?
Misaligned-CW, misaligned-CCW, and aligned. You're welcome.
 
Archer
Posts
28,025
Likes
71,533
Goseki Goseki
Do you happen to know what the 3 positions are?
The correct one and two others…120 degrees away from the correct one in each direction.
 
Goseki
Posts
31
Likes
10
Archer Archer
The correct one and two others…120 degrees away from the correct one in each direction.
Ahh so it should be around the noon, 4, and 8 o'clock position. Mine was at 10'oclock so sounds more like it wasn't tightened properly initially.
 
Goseki
Posts
31
Likes
10
Update: I was able to contact Omega, and they verified that the watch had undergone water resistant testing before being shipped back, and passed the 300m test.
 
16 More Posts...
Sign up or log in to reply...

Similar threads

Greatpa

A Trip To: The Finnish School of Watchmaking

Greatpa Open Discussion
Greatpa
Greatpa
Posts
7
Views
3K
S

Care to take a trip to the casino?

stadogs Vintage Omega Watches Help, Discussion and Advice
S
stadogs
Posts
25
Views
2K
Andsan

A trip to Glashütte Manufactory

Andsan Open Discussion
Andsan
Andsan
Posts
16
Views
3K
omegaaddict

A trip to the Omega Museum in Bienne, Switzerland

omegaaddict Open Discussion
SpeedyPhill
SpeedyPhill
Posts
24
Views
8K