caliber 1861 hacking seconds question

Posts
388
Likes
390
My question is for a 3750 speedy pro with a 1861 movement. If I put some backwards pressure on the crown the running seconds stops moving. Is it ok to use that to hack the seconds or can that potentially damage the movement?
 
Posts
16,706
Likes
35,041
As long as the seconds only stops it's OK.
If it starts to run backwards it can cause problems, possibly chipping the pallets jewels.
 
Posts
3,042
Likes
5,887
As long as the seconds only stops it's OK.
If it starts to run backwards it can cause problems, possibly chipping the pallets jewels.

Wait, you mean if the seconds hand starts running backwards?
 
Posts
6,523
Likes
26,480
Wait, you mean if the seconds hand starts running backwards?
Correct. One of my Speedmasters starts to run backwards when I try to back hack it at full wind. If I let it run down a little, it back hacks just fine.
As long as the watch doesn’t run backwards, there’s no harm in back hacking.

If it does hack at full wind, just let it run down a bit.
 
Posts
3,042
Likes
5,887
Correct. One of my Speedmasters starts to run backwards when I try to back hack it at full wind. If I let it run down a little, it back hacks just fine.

You're not talking about the hands moving backwards though, you're talking about the actual seconds hand running backwards... right?

There's a time travel meme in here somewhere
 
Posts
6,523
Likes
26,480
you're talking about the actual seconds hand running backwards... right?
Correct. Instead of “hacking” it will begin ticking backwards.
 
Posts
2,006
Likes
3,381
As I think I posted before, the manual for my 1861 states that it is OK to hack as described. However, a more recent manual removed all reference to this method, so read into that what you will. I’ve done it for years with no issues so as long as you’re careful…
 
Posts
2,006
Likes
3,381
And yes, you’re better off doing it when the power reserve is low.
 
Posts
7,049
Likes
13,156
And yes, you’re better off doing it when the power reserve is low.
Exactly, if you need to set the time by hacking the watch do it with little power in the mainspring, then wind it up fully.