Community Stories

3D Printed Tool Organizers

JimInOz
Posts
16,747
Likes
35,108
After seeing GGs tool holders I decided I needed some so with his design help (in Europe) and @HIXTAR doing the printing for me (in Australia) I now have them, as well as a storage case for watch hands, and some other little knick nacks.

tempImageciZqGM.webp
 
rendo
Posts
726
Likes
2,696
JimInOz JimInOz
After seeing GGs tool holders I decided I needed some so with his design help (in Europe) and @HIXTAR doing the printing for me (in Australia) I now have them, as well as a storage case for watch hands, and some other little knick nacks.
Thanks for sharing. Is the stl for the watch hands box available on the internet?
 
JimInOz
Posts
16,747
Likes
35,108
rendo rendo
Thanks for sharing. Is the stl for the watch hands box available on the internet?
Not yet as it's only an insert to go in a coin display box, I might re-design it.
However, if you want to try it out I can drop the stl here for you.

tempImagenLEBgm.webp
Edited:
 
JimInOz
Posts
16,747
Likes
35,108
So, with the help of @GuiltyGear and @HIXTAR I can now use the cleaning basket from my Elma cleaning machine in my ultrasonic cleaner.

The grey Basket Adapter in PLA fitted to the beaker lid.
IMG_4324.webp

and fitted to the basket.
IMG_4325.webp

at the perfect height for cleaning.
IMG_4326.webp
 
rendo
Posts
726
Likes
2,696
JimInOz JimInOz
Not yet as it's only an insert to go in a coin display box, I might re-design it.
However, if you want to try it out I can drop the stl here for you.

tempImagenLEBgm.webp
I like the idea. I will see try to find a similar clear box and design an insert for it.
 
GuiltyGear
Posts
527
Likes
1,649
I've been designing for the past few days a stackable dust tray for watch parts. Very easy to print, no supports, about 37 grams of filament, and stacking is decently secure. Comes with a lid that if you have transparent filament laying around, will look even nicer. Thanks to @JimInOz for the help in designing these.

Find the model in MakerWorld.

DSC_5631.webp DSC_5632.webp DSC_5633.webp
 
Sign up or log in to reply...

Similar threads

GuiltyGear

3D Printed Case Openers Part 2

GuiltyGear Watchmaking
Ultraman Zoffy
Ultraman Zoffy
Posts
4
Views
788
GuiltyGear

3D Printed Case Openers

GuiltyGear Watchmaking
C
chicane
Posts
18
Views
3K
kaplan

19mm Constellation Case Opener and Watch Holder to 3D-Print

kaplan Open Discussion
kaplan
kaplan
Posts
3
Views
2K
perks713

3D Printing : boxy watch winder replacement domes

perks713 Open Discussion
perks713
perks713
Posts
0
Views
648
O

Created Tool 206 (Omega Dynamic strap tool) to 3D print

osunick Vintage Omega Watches Help, Discussion and Advice
Eco54
Eco54
Posts
9
Views
7K
Declinedesign

3D printed Speedmaster case opener.

Declinedesign Open Discussion
Linesiders
Linesiders
Posts
38
Views
6K