- Posts
- 779
- Likes
- 3,636
fibonacci086
·Hi folks !
I'd like to show you a nice Ed White 105.003-63 I recently acquired:
Non-pro dial, with applied Omega logo:
Step
this dial may have been produced a very short time after the T marking surrounding "Swiss made" became mandatory. So the Ts were added in a second time, hence the asymmetrical design (low Ts / high SWISS MADE).
This dial is the A6bis type according to MWO.
Drop end chrono hand:
patinated tritium on hands:
faded blue DON base 500 bezel:
Hesalite glass with thick Omega logo, not clear if type 2 or type 4 according to MWO
Few stains on minute and hour subdials.
Pushers are type 2 Medium, 4.5 mm diameter X 3 mm length.
Crown is a replacement
Lug facets are still visible :
Double bevelled back with engraved seahorse:
And the final wristshot, on a nice JB champion bracelet
Cheers to all !
I'd like to show you a nice Ed White 105.003-63 I recently acquired:
Non-pro dial, with applied Omega logo:
Step
this dial may have been produced a very short time after the T marking surrounding "Swiss made" became mandatory. So the Ts were added in a second time, hence the asymmetrical design (low Ts / high SWISS MADE).
This dial is the A6bis type according to MWO.
Drop end chrono hand:
patinated tritium on hands:
faded blue DON base 500 bezel:
Hesalite glass with thick Omega logo, not clear if type 2 or type 4 according to MWO
Few stains on minute and hour subdials.
Pushers are type 2 Medium, 4.5 mm diameter X 3 mm length.
Crown is a replacement
Lug facets are still visible :
Double bevelled back with engraved seahorse:
And the final wristshot, on a nice JB champion bracelet
Cheers to all !
