Posts
230
Likes
1,097
I'm hoping someone can share a link to source reasonably priced Pusher/Crown seal kits and a new crystal (other than eBay): for my well enjoyed Seiko 6139 Pogue/Cevert.
I'm repairing it on a shoestring budget. Located in Canada
Thank you in advance.

Edited:
 
Posts
1,320
Likes
6,020
TBH, I tend to go for Sternkreuz crystals - for some Seikos, their profile is a bit "wrong" but for the 6139 series, I think they work well and are readily available. The original Seiko PN is 330W18GN and Sternkreuz equivalent is XMD 330.821.

You can get them for about £30 in the UK and various sellers on eBay for a bit more.
 
Posts
3,168
Likes
6,912
Did you get the parts you need? Adrian at VAT in Oz sells good quality gaskets as a kit for watch references.
It’s a little more $ but good quality and for 1 watch makes it easier
Show the completed result when it’s done.
 
Posts
336
Likes
278
Hopefully you already got what you needed.

If not, Ewan is correct that the Sternkreuz is probably the best replacement crystal out there for a 6139-600x. I don’t know if there is a seller of these in Canada, but they’re available from ofrei.com … I have many 6139-600x and usually keep a few of these on hand. O Frei’s site is difficult to navigate, but the Sternkreuz crystal is on this page, most of the way down on the left-hand side:

https://www.ofrei.com/page_169.html

As for gaskets, the gasket kit available on eBay is actually very good:

https://ebay.us/m/wfK1P2

The seller is a member on the Seiko/Citizen Watch Forum. The specialist watchmaker who has rebuilt several of my Pogues uses these gasket kits in his restorations. If you’re a member on SCWF, you can probably buy what you need there and avoid the eBay nonsense.