Omega replica NASA Velcro strap "hangover" due to a smaller wrist? Try this...

Just wanted to pass this along to those that may be interested and/or affected...

I recently learned from a member (Rocky) of another watch forum a new way to wrap the Omega replica NASA Velcro strap that came with my Speedy Gonzales and presentation box set...and it works FABULOUSLY...except for the somewhat nagging strap "hangover" of about 3 - 4cm due to my smaller wrist.

Pic 1...the "hangover"...due to my smaller wrist...


So I started thinking a wee bit (at about 0230) regarding a method to easily (and temporarily) shorten the strap so that the "hangover" can be prevented. I had an epiphany (at about 0231) and just had to immediately give it the old college try. Basically, one initial fold is made (to Rocky's already FABULOUS method) at the metal loop end of the strap. This fold prevents the "hangover" from occurring by slightly shortening the strap. The fold stays in place on the wrist due to the stiffness of the nylon material (which is already doubled over and stitched) at the metal loop (see pic 3a) and due to the fact that the fold is pinned between the wrist and the two outer loops of the strap (see pic 4a).

THE BOTTOM LINE...
1. The Omega replica NASA Velcro strap is shortened by about 3 - 4cm to prevent the "hangover" for those individuals with smaller wrists (see pic 1 compared to pic 5).
2. On-the-wrist security is increased due to more of the Velcro hooks being utilized (see pic 1 compared to pic 5).
3. The strap is not being permanently altered...it is folded at a specific location (see pic 3 and pic 3a).
4. It's free! 👍

I will attempt to describe the strap shortening fold and the end result via the following pics...

Pic 2...


Pic 2a...


Pic 3...


Pic 3a...


Pic 4...


Pic 4a...


Pic 5...hot dog...no "hangover"! 👍


Pic 6...time to hit the rack! 😲

The black and white pics make this feel intense and serious. 😁

Nice work Mad Dog 👍

Well done @Mad Dog
It looks nice on your wrist👍

No problem...and thanks for the compliments, all. 👍

@tpatta...yes, I currently do have WAY too much free time. I just completed Delta simulator training/checking in ATL where they really put us through the wringer regarding MD-88/90 aircraft emergencies and maneuvers...I passed with flying colors (again) but it's still stressful. So now it's time to party (dork around) since I get to play airline pilot for another 9 months until the next training/checking session rolls around. Luckily, I have off days through 08JUL16 so I've been doing some major dorking with stuff (watches) since I have boat loads of free time at the moment. 😁

Cool beans...thanks, man. 😎

Here are a couple more pics from today in better lighting...with the strap reversed where the branding/letters/numerals are outboard versus inboard...

Really? That was not my intention...the lighting made the colors look funky so I switched all the pics over to black and white. 😁

In a good way. The pics look like they should be in a official instructional pamphlet that comes with the strap. 📖
It's a nice result 👍

How about now? Good? 😁

Looks great ! So it's a 19" strap folded over/doubled before wrapping around your wrist?

Oh, that makes sense. And I thought the color was broken on your camera.

Correct...although you could do the double wrap while on the wrist.

My wrist is small and I had a similar problem with a Gas Bones strap. I ended up running the strap through 1 pin then through the ring then around by wrist and it shortened it just enough to work out for me.

I threaded it like this. It also doesn't touch the case back this way.