Community Stories

noticed something odd when servicing cal 552

Horologist
Posts
186
Likes
55
Greetings,
I just serviced an omega movement caliber 552 and got it running but I just noticed that I had no click and click spring on it when I put it together. It had been setting idle for a couple of weeks before I disassembled it and could not remember if it even had one to begin with. I don't remember losing any parts either. It has never happened to me before,or ever noticed it. but it is running after I tried to wind it. I notice a tap when the rotor moves possibly because the spring is slipping upon full wind. Is this normal? If so, how does one release the power on it. Very odd!!!
 
Horologist
Posts
186
Likes
55
Archer Archer
It should have a click and spring…
I would have thought so as it would seem absurd not to have it! What is strange is that It runs for a good 12 hours without a click! I have never had this experience before with any other watch which is what I find strange, prompting me to share this! I see It is a problem with a positive side effect🤔
 
Archer
Posts
27,911
Likes
71,075
Horologist Horologist
I would have thought so as it would seem absurd not to have it! What is strange is that It runs for a good 12 hours without a click! I have never had this experience before with any other watch which is what I find strange, prompting me to share this! I see It is a problem with a positive side effect🤔
The automatic winding will keep it wound to an extent, but as soon as you remove any of that the mainspring will rapidly unwind, so make sure it is run down as much as possible before doing so.

You should really get the click installed…
 
Horologist
Posts
186
Likes
55
Archer Archer
The automatic winding will keep it wound to an extent, but as soon as you remove any of that the mainspring will rapidly unwind, so make sure it is run down as much as possible before doing so.

You should really get the click installed…
Thank you! That answers my question. I was mostly puzzled on how to release power from the mainspring if the click is not there to be pushed back for the mainspring to unwind,

I also saw a post some years ago ( not sure where )that removing pallet fork is another way to release power as done with the Brac 2002 pin lever movement, as click is not s present or seen! I did not want to risk this method with the 552 by gambling the pallet fork,

Have just ordered a click, spring and screw from eBay and will need to wait until it arrives!
This was a great learning experience for me!
 
Sign up or log in to reply...

Similar threads

Asturianucu

Christmas self-gift: Rescuing a 1956 Seamaster

Asturianucu Vintage Omega Watches Help, Discussion and Advice
Asturianucu
Asturianucu
Posts
41
Views
8K
DaveK

Rubbing under the rotor on an Omega Seamaster Cal 552?

DaveK Vintage Omega Watches Help, Discussion and Advice
Canuck
Canuck
Posts
3
Views
4K
toddle321

Omega Seamaster 300 "watchco" 165.024, Vintage Diver, Cal 552

toddle321 Private Watch Sales
toddle321
toddle321
Posts
0
Views
2K
BenBagbag

Gold-capped Omega Seamaster Cal. 552 - $325

BenBagbag Private Watch Sales
BenBagbag
BenBagbag
Posts
2
Views
3K