Identifying old Omega watch

Posts
8
Likes
0
Hi!
I would like help identifying this Omega watch. I know it was produced between 1947-1951. Iv’e tried finding the Ref number but can’t find any watch with the same dial. Id love any help!

 
Posts
12,667
Likes
17,110
You will need to take it to a watchmaker to open it up. There should be a movement serial number that will tell us the approximate year of manufacture. There may be a case reference number on the inside of the caseback.

My guess is that the watch is a little older than you think. Maybe WWII vintage.
gatorcpa
 
Posts
8
Likes
0
You will need to take it to a watchmaker to open it up. There should be a movement serial number that will tell us the approximate year of manufacture. There may be a case reference number on the inside of the caseback.

My guess is that the watch is a little older than you think. Maybe WWII vintage.
gatorcpa
I had it at a watchmaker who checked the serial number and told me the year of make 1947-1951. Unfortunately I failed to remember the reference number.
 
Posts
8
Likes
0
IMO a ref CK 2179
That reference has the same type of dial but a different “rounded” back. My watch has a flat back.
 
Posts
110
Likes
72
I had it at a watchmaker who checked the serial number and told me the year of make 1947-1951. Unfortunately I failed to remember the reference number.
Sometimes after opening the watchmaker will only loosely tighten the case back. You may be able to re-open using watch ball or bamboo skewer.
 
Posts
3,918
Likes
8,782
Sometimes after opening the watchmaker will only loosely tighten the case back. You may be able to re-open using watch ball or bamboo skewer.
Bamboo skewer?
 
Posts
3,385
Likes
7,276
That reference has the same type of dial but a different “rounded” back. My watch has a flat back.
Who told you this "wisdom"?? Source?

here is a 100% original 2179 (US Army variant) for comparison - it has a flat back like your´s

 
Posts
8
Likes
0
Who told you this "wisdom"?? Source?

here is a 100% original 2179 (US Army variant) for comparison - it has a flat back like your´s

The watchmaker who opened the watch checked in his Omega archives and the reference number showed it was made between 1947-1951. Do you have the outer “shell” thing that sits outside of your movement?
 
Posts
110
Likes
72
Bamboo skewer?
Yes, use them all the time for cleaning in crevices and starting case backs on threads. Can be found at grocery store. They are like an oversized toothpick and will not scratch the finish.
 
Posts
21,301
Likes
48,468
The watchmaker who opened the watch checked in his Omega archives and the reference number showed it was made between 1947-1951. Do you have the outer “shell” thing that sits outside of your movement?
That reference has the same type of dial but a different “rounded” back. My watch has a flat back.

A lot of incorrect information being posted by a new member. No introduction, no context, no please or thank you. Most likely, we will see this POS listed on eBay soon with the same misinformation and described as having lovely patina.

OP, as noted above, just open the watch and post photos. It's pointless to speculate and argue with experts.
 
Posts
12,667
Likes
17,110
Do you have the outer “shell” thing that sits outside of your movement?

You mean like this?

20240716_101330-jpg.1812749

The above is a cal. 30T2 movement from a Ref. 2179. I agree with @mac_omega on this one. After all, he literally wrote the book on these.

If the serial number is in the 11 million range, then your watchmaker is also correct.

gatorcpa
 
Posts
8
Likes
0
Sometimes after opening the watchmaker will only loosely tighten the case back. You may be able to re-open using watch ball or bamboo skewer.
The back is not loose enough for me to open unfortunately
 
Posts
8
Likes
0
A lot of incorrect information being posted by a new member. No introduction, no context, no please or thank you. Most likely, we will see this POS listed on eBay soon with the same misinformation and described as having lovely patina.

OP, as noted above, just open the watch and post photos. It's pointless to speculate and argue with experts.
You are correct I am a new member. If I come across as impolite I do apologise, english is not my first language. I should have started by giving some backstory, I found the forum today and I got a bit carried away. I will rectify my mistake, I’m sorry.
 
Posts
8
Likes
0
You mean like this?

20240716_101330-jpg.1812749

The above is a cal. 30T2 movement from a Ref. 2179. I agree with @mac_omega on this one. After all, he literally wrote the book on these.

If the serial number is in the 11 million range, then your watchmaker is also correct.

gatorcpa
Yes! Exactly what I meant, thank you!
 
Posts
8
Likes
0
Who told you this "wisdom"?? Source?

here is a 100% original 2179 (US Army variant) for comparison - it has a flat back like your´s

Yes, the back of your watch looks exactly the same as mine! It might be that the watchmaker I went to might have been incorrect about the year it was produced. Thank you for the info! When trying to do research online I find similar models but with differing dials, I have yet to find one with a ”flat back” and numerals that resembles mine. I guess opening it might be my only option. Thanks for the help.
 
Posts
12,667
Likes
17,110
I have yet to find one with a ”flat back” and numerals that resembles mine
That is not surprising. Omega used many different dial designs on these watches. Some with radium and some without. Yours is without radium.
gatorcpa