Community Stories

Does anybody know how 2915 bezels really looked like?

nerdbedusa
Posts
234
Likes
248
Vintagewtchzilla Vintagewtchzilla
.... one simple hint the bezel width .....and some more indications

If you were me, everybody here would ask you to share your knowledge... 馃槈
 
mr_yossarian
Posts
2,428
Likes
4,698
nerdbedusa nerdbedusa
If you were me, everybody here would ask you to share your knowledge... 馃槈

Right. And why don't you simply post - explicitly of course - one of the 2915 bezels you produced and sold yourself?

Would make it easier to get advice on what you should work on for the next ones..and would've held this thread way shorter.
 
nerdbedusa
Posts
234
Likes
248
mr_yossarian mr_yossarian
Right. And why don't you simply post - explicitly of course - one of the 2915 bezels you produced and sold yourself?

Would make it easier to get advice on what you should work on for the next ones..and would've held this thread way shorter.

Sounds like a good idea, but I am far away from starting a business.

All I want is to finalize some projects, that have been in my drawer for more than a decade by now.
 
mr_yossarian
Posts
2,428
Likes
4,698
nerdbedusa nerdbedusa
Sounds like a good idea, but I am far away from starting a business.

All I want is to finalize some projects, that have been in my drawer for more than a decade by now.

Yes, you might be beyond the start of a business, but what about: no, I never produced any of these bezels?
 
Vintagewtchzilla
Posts
946
Likes
2,077
THIS is the reason why not every detail is spread into the wild .... and shouldn't be ....

obvious fake with lot of faults ...
 
This website may earn commission from Ebay sales.
nerdbedusa
Posts
234
Likes
248
mr_yossarian mr_yossarian
Just asking...10 minutes ago.

Sorry. I've just been with the kids. 馃榾

Yes. I had some bezels produced and sold about 15 of them over the past 8 years. So for me this was not an idea of getting rich, but helping other collectors to complete their watches or making them wearable at least.

Everyone who bought a bezel from me was (and is still) happy with it.

And I promise that everyone who bought one will receive an improved update for free, which is a matter of honor, while I most likely won't sell any further reproductions in the future.

Just as I said: I'm intending to finalize my own projects now.
 
Vintagewtchzilla
Posts
946
Likes
2,077
as u speak of honor, then your improved version should contain a public known "fault" so that even a noob can spot it as fake
 
nerdbedusa
Posts
234
Likes
248
Vintagewtchzilla Vintagewtchzilla
as u speak of honor, then your improved version should contain a public know "fault" so that even a noob can spot it as fake

Good idea. What do you suggest?
 
Atalien2005
Posts
396
Likes
1,540
nerdbedusa nerdbedusa
Sorry. I've just been with the kids. 馃榾

Yes. I had some bezels produced and sold about 15 of them over the past 8 years. So for me this was not an idea of getting rich, but helping other collectors to complete their watches or making them wearable at least.

Everyone who bought a bezel from me was (and is still) happy with it.

And I promise that everyone who bought one will receive an improved update for free, which is a matter of honor, while I most likely won't sell any further reproductions in the future.

Just as I said: I'm intending to finalize my own projects now.

So the plot thickens. I was wondering why everyone was being so cryptic, but it all makes sense now. 馃嵖
 
Vintagewtchzilla
Posts
946
Likes
2,077
e.g instead of a dot at 300 make it underlined.... and a deep engraving on the inside of the bezel ...
 
mr_yossarian
Posts
2,428
Likes
4,698
nerdbedusa nerdbedusa
Sorry. I've just been with the kids. 馃榾

Yes. I had some bezels produced and sold about 15 of them over the past 8 years. So for me this was not an idea of getting rich, but helping other collectors to complete their watches or making them wearable at least.

Everyone who bought a bezel from me was (and is still) happy with it.

And I promise that everyone who bought one will receive an improved update for free, which is a matter of honor, while I most likely won't sell any further reproductions in the future.

Just as I said: I'm intending to finalize my own projects now.

Thanks for this answer in all it's contradictive nature towards itself and your opening post. And we are probably not done yet, despite of your "forward defence".
 
nerdbedusa
Posts
234
Likes
248
mr_yossarian mr_yossarian
Thanks for this answer in all it's contradictive nature towards itself and your opening post. And we are probably not done yet, despite of your "forward defence".

Well, I think I was asking a simple question. And I guess I was right doing it here.

But obviously this turns out to be a thing that gives no answers to me, while it's asking answers from me all the time.

And the more answers I give, the more are expected.

So I apologize once again for having posted this thread. It has been a stupid idea, which I still believe was worth a try...
Edited:
 
nerdbedusa
Posts
234
Likes
248
mr_yossarian mr_yossarian
Just asking...10 minutes ago.

Just answering... More than 10 minutes ago.

Any new thoughts to bring in from your side after having announced an epilogue?
 
nerdbedusa
Posts
234
Likes
248
Vintagewtchzilla Vintagewtchzilla
e.g instead of a dot at 300 make it underlined.... and a deep engraving on the inside of the bezel ...

How about making a 666 instead of the 60?
 
mr_yossarian
Posts
2,428
Likes
4,698
nerdbedusa nerdbedusa
Just answering... More than 10 minutes ago.

Any new thoughts to bring in from your side after having announced an epilogue?
For what? Someone to pad your head?
Let me sum up:
You build them, you sell them, you ask questions about them. you don't plan a business with them.
All said.
 
nerdbedusa
Posts
234
Likes
248
mr_yossarian mr_yossarian
For what? Someone to pad your head?
Let me sum up:
You build them, you sell them, you ask questions about them. you don't plan a business with them.
All said.

Yes. With exception to an answer to my original question.
 
22 More Posts...
Sign up or log in to reply...