Community Stories

Chrono minute hand jumping early on 3572.50

S
Posts
23
Likes
5
Hi,
I just got my first Speedmaster (excited!), it's a 3572.50 from 2002. It appears to be functioning very well except for one peculiar behaviour... basically, the chrono minute hands jumps around the 58 sec mark, a two full seconds early. I was wondering, is it something that can be easily corrected when I send the watch for servicing in the future, or more like a permanent imperfection of the movement? (NB, supposedly the watch has just been serviced by an authorised Omega servicer)

Thanks!
Peter
 
Archer
Posts
28,112
Likes
71,847
This has been a big topic on forums over the last year or so it seems. Does it finish the jump at 58, or start the jump at 58? Where it finishes is the important part, so it will start to move before the seconds recorder hand reaches 12 in order to complete it as it reaches 12.

While the Cal. 321 has a direct adjustment of this, the Cal. 861/1861 family does not. There are some checks that need to be done (chronograph controls - these are listed in Omega technical documents) to ensure everything is right for proper operation of the chronograph in general, so those would be the first things to check. But if all of those are fine and it still is not jumping at the right time, then per my conversations with Omega, they next step is to replace both the seconds recording wheel and minute recording wheel, and "see if that helps" as the head of service told me not that long ago on the phone...

So if yours if completing the flip at 58 seconds, then I would expect it can be made much closer by changing some parts, but if it is within the second then sometimes it might help, and sometimes not based on what they have told me.

Cheers, Al
 
Dedalus05
Posts
414
Likes
859
I spent the day obsessing over this issue. And taking @Archer's advice I looked around and found this thread here discussing what appears to be a common enough issue with Speedmasters.

For the record mine starts to jump at 58 seconds and seems to complete the jump between 59.5 and 59.8 seconds, so I decided to be magnanimous about it and not go waking my AD up on a Sunday morning.

D
 
S
Posts
23
Likes
5
Thank you both!
Mine completes the jump at or just after the 58th second mark and starts about half a second earlier - so it seems to be worse than most. Looks like I should probably ask the seller to take it back to the servicer and see if they can fix it...

Much appreciated,
P
 
Super Fuzz
Posts
53
Likes
18
My Speedy (a few months old) jumps at 59 seconds. I’m curious to know, other than people obsessing over perfection, how this actually impacts using the chronograph?
 
W
Posts
23
Likes
30
i have a trilogy speedy that completed the jump at 58 seconds... they fixed it under warranty. it's unacceptable for a precision timing instrument
 
precisionhrlgy
Posts
247
Likes
710
If the end of the jump is happening at 58 seconds, parts don’t necessarily need changing. The finger that controls the jump which is on the under side of the chronograph runner can be moved to change the timing of the jump.

Omega reference this adjustment in their technical guide, however, they do not offer a solution.

You can use a 0.8mm screwdriver blade (preferably something softer) to move the finger around which controls the jump. It can be set very close to the exact 60 second jump.
 
S
Posts
23
Likes
5
precisionhrlgy ATracyWatches
If the end of the jump is happening at 58 seconds, parts don’t necessarily need changing. The finger that controls the jump which is on the under side of the chronograph runner can be moved to change the timing of the jump.

Omega reference this adjustment in their technical guide, however, they do not offer a solution.

You can use a 0.8mm screwdriver blade (preferably something softer) to move the finger around which controls the jump. It can be set very close to the exact 60 second jump.

Thank you, that's very good to know - even if myself I wouldn't dare to attempt such operation!
 
Bp1000
Posts
622
Likes
2,837
My speedy pro completes the jump st 59.3 - 59.5 seconds. Both ck2298 are spot on. Those two run fast 2-5 sec. Speedy pro runs 5-8 sec slow 🙁

Really dislike slow running watches although the time keeping has nothing to do with the chrono mechanism
 
precisionhrlgy
Posts
247
Likes
710
S sleszyk
Thank you, that's very good to know - even if myself I wouldn't dare to attempt such operation!
I certainly would not recommend trying it yourself! However, my point was is it possible. Whether Omega claim it is or not is another matter. I have some great information from WOSTEP on how to make the precise adjustment.

59.5 seconds is accepted within tolerance, as there must be clearance in between the intermediate wheel and the finger on the chronograph runner. 58 seconds, however, is not acceptable and should be adjusted.
 
Sign up or log in to reply...

Similar threads

R

Is this normal? Chrono minute hand ticks early

reemas Modern Omega Watches
Evitzee
Evitzee
Posts
19
Views
8K
madmax1

Speedmaster cal. 1861 minute hand jumping early

madmax1 Unique Watches & Complications
vbrad26
vbrad26
Posts
29
Views
13K