Cal 30T2Rg question

Posts
14
Likes
92
Good morning,
I'm quite new in the world of 3 hands Omegas, feel much more comfortable in chrono universum, but I'm helping my friend to restore quite nice Omega with 30T2Rg. I have already discovered the differences (more or less in 30T/26x family, I know that 30T2Rg is more or less 262, I know bunch of details differs from regular 260, I assume with the level of finishing.
So the issue is as follows: the balance staff is broken, As I found in product card - 262 balance staff is different than 260, I found the info about deluxe version of this part. Is it only cosmetic difference - highly polished or more carefuly machined, or the parameters of this staff are different - length/diameter etc? So the question simply put is if it is possible to use regular 260 balance staff in 30T2Rg or won't work or if even would work, we all finish in hell, because it's like wearing flip-flops to tuxedo?
regards
Wasyl
 
Posts
607
Likes
785
It may just have a longer balance staff to be used - but it is one of the parts that characterize the 262/281.
As you say, "wearing flip-flops to tuxedo"

I would rather be looking for an original one. Part number 262-1327, careful because later furniture will be glucydur rather that the original bimetallic
 
Posts
141
Likes
58
Hi,
I had the same problem and asked Erich (author of the Omega 30mm Chronometer book) and he replied me:
Nimm eine von irgendeiner cal 30 oder T1 oder T2 aber nicht von 26x oder 28x weil die sind nicht bimetallisch sondern Glucydur (monometallisch und uncut).
Du wirst nämlich keine originale alte (nicht Omega replacement) unruh von 30 Rg finden...

You can use Translate if neccecery.
 
Posts
141
Likes
58
My friend who is a watchmaker could fix the balance staff for my newly bought Chronometer. If you need a balance staff, I think, he can fix it and I cand send it. I think, it cost around 50Euro here in Sweden.
 
Posts
14
Likes
92
Hi,
I had the same problem and asked Erich (author of the Omega 30mm Chronometer book) and he replied me:
Nimm eine von irgendeiner cal 30 oder T1 oder T2 aber nicht von 26x oder 28x weil die sind nicht bimetallisch sondern Glucydur (monometallisch und uncut).
Du wirst nämlich keine originale alte (nicht Omega replacement) unruh von 30 Rg finden...

You can use Translate if neccecery.
I understand but you refer to balance wheel. My balance wheel feels perfectly well, all I need is to change balance staff. The question is if 30t2Rg/262 differs in length or diameter from the rest of the family 😀
 
Posts
607
Likes
785
Balance staff for 262 is available on eBay, item n. 372121435460
 
Posts
141
Likes
58
You are right. I didn’t think about it.
Yes it differs. I don’t know in what sentence but my watchmaker changed first to a balance staff for 30t2 and it was not good enough. Later he ordered a balance staff for rg and it solved the problem.