1954 omega case reference and glass help.

Posts
17
Likes
1
Hello folks.

I need to source a new glass for the below, having trouble identifying this case number (523956) to then get the right crystal.

can anyone help? Thanks

 
Posts
16,760
Likes
35,138
It looks to be a locally cased example therefore the "case reference" doesn't tie in with OEM data.
Can you provide more info on the actual watch so we can figure out what sort of crystal it needs.
 
Posts
16,760
Likes
35,138
Quite possible an Australian cased watch so it would not have had an "Omega" crystal.
Your best bet is to remove the crystal and measure diameter/height and other points (tension ring or not?) and then locate a generic crystal.
 
Posts
328
Likes
338
if it's one of those ribbed midcase australian watches then the crystal is probably 28.2mm dia.
 
Posts
17
Likes
1
if it's one of those ribbed midcase australian watches then the crystal is probably 28.2mm dia.
I reckon you’re right. Any good sources in Australia for such glass you know of??
 
Posts
17
Likes
1
Quite possible an Australian cased watch so it would not have had an "Omega" crystal.
Your best bet is to remove the crystal and measure diameter/height and other points (tension ring or not?) and then locate a generic crystal.
Thanks mate will do. Any suggestions for Aussie based crystals?
 
Posts
328
Likes
338
I reckon you’re right. Any good sources in Australia for such glass you know of??

Any watchmaker would have good generic replacements, but if you're concerned about getting a similar dome profile let the watchmaker know.
$20-30 would be what most good places charge
 
Posts
328
Likes
338
Those cases are easy to pick out by the shape of their lugs and the fact that they don't use a proper movement retainer ring!