Hi all,

I have a few straps for my Seamaster MC300. All original Omega. I only had the original strap changed once at an Omega boutique. I'm wanting to be able to change straps myself, but fear of scratching the lugs. Please recommend the PROPER tool- be it Omega or Bergeon etc..

Thanks

 

I use a Bergeon 6767. One side is forked the other round. Only issue I've ever had is stabbing myself. The fker is sharp.

As for scratching the lugs, I would suggest putting scotch tape on them before changing, and ALWAYS change straps from the back of the watch. Also while still getting the hang changing straps, do it in a plastic bag. It's almost inevitable that you will hear a "pinggg!" And the spring bar will shoot into oblivion and you will never find it.

 

Thank you, and I'll take the advice on the plastic bag for sure

 

Just to clarify a bit further, it's the Bergeon 6767F you want IMO.

 

Bergeron 6767 as others have noted. As for taping the lugs, my preference is to use gaffers tape. It's expensive because the only rolls you can buy are humongous, but the advantages are it's very thick and leaves zero sticky residue on your watch afterwards.

 

Thank you all. Gaffers tape? Is that like duct tape? (The silver stuff?) What is the best source for the tool? Thanks again! John

 

Here's a synopsis of the tape and it's properties. It looks a bit like duct tape, but it is nothing like it in practice. The nice thing is you can push it down with a lot of force to make sure it's secure, yet it will leave zero residue:

https://en.m.wikipedia.org/wiki/Gaffer_tape

This is the kind I use:

https://www.amazon.ca/gp/aw/d/B000QC0XZO/ref=mp_s_a_1_3?ie=UTF8&qid=1499776282&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=gaffers tape&dpPl=1&dpID=412N4MbMizL&ref=plSrch

Expensive, but one roll will last you a long, long time.

Here is a link to the Bergeron tool:

https://www.amazon.ca/gp/aw/d/B001IZT8R2/ref=mp_s_a_1_sc_1?ie=UTF8&qid=1499776370&sr=8-1-spell&pi=AC_SX236_SY340_QL65&keywords=Bergeron 6767

You can also by it from Offrei.com

 

Actually you can buy short rolls from Amazon https://www.amazon.com/ProTapes-306...&qid=1499776815&sr=8-12&keywords=gaffers+tape

 

Thank you both
John

 

+1 on the Bergeon 6767F. Turn the watch over and only change the strap facing the caseback side, avoids any danger of scratching the front. Also, get a box of spare spring bars, you'll need them for sure

 

Will do. Thank you

 

Yes, the Bergeron 6767F is the magic tool to beat all tools. I have a drawer full of derelict springbar tools, and even a springbar plier, but since I stumbled upon the 6767F all the other tools now just gather dust.

 

I actually find the Omega tool easier to use for JUST strap changes. The handle is larger and hollow, so it's held in my hands a little easier that the thinner and heavier Burgeon. But I prefer the 6767-F for bracelets, as the length and slimness come in handy for the different connecting and adjustment points.

As others have stated, masking, electrical, gaffers or even helicopter tape will all work for preventing damage. Just take it slow, baby steps, and you'll be good to go.

 

Well just yesterday I purchased the 6767S on amazon. Should I return it and get the F or should I just get the 6767F and have both?

 

Thanks all. I have currently no bracelet for my watch- I'd be changing from leather to NATO, and vise versa but I may get a bracelet in the future. So Bergeon it is! Thanks. John

 

Have both, the thicker fork is better for changing leather straps

 

I initially bought a Paylak tool and the forked end was just too darn wide. At only $8 though it's replaceable. Got the Bergeon 6767F and it's perfect. $15 on Amazon.

 

Another chime in for the 6767F - I personally have never had an issue with a spring bar sailing, but that's only because the straps seem to grip them pretty tightly. If I were using just a NATO I could see it being a problem. If you are careful you won't scratch the lugs.

 

I have the 6111 and struggle a little sometimes, anyone able to compare the 6111 and the 6767F and S?

Keep in mind that I also struggle stabbing my foot through the leg hole in my underwear.

 

I have a selection of heads, basically all of the ones fitted to both 6767F and 6767S. I find the S heads much too large to be any use and use the F heads mostly. The S is probably fine for leather straps but the fork head probably won't fit into the slot in bracelets, which is where the F comes into its own.