Forums Latest Members
  1. EdtheAussie Oct 13, 2016

    Posts
    999
    Likes
    1,060
    Hey guys,

    Just looking for your thoughts on this speedmaster 74. My only concern was that the movement looked tarnished? I checked it out with Speedmaster101, but would appreciate some more experienced eyes.

    http://m.ebay.com.au/itm/291909315295Purchases made through these links may earn this site a commission from the eBay Partner Network

    If you were to offer a BIN, how much would you be happy to pay?

    Thanks,
    Ed.
     
  2. Banner Roar Oct 13, 2016

    Posts
    1,014
    Likes
    2,580
    What did you find out on Speedmaster101.....
     
  3. WurstEver Oct 13, 2016

    Posts
    436
    Likes
    1,587
    It would be interesting to know what kind of condition the original hands are in.
     
    EdtheAussie likes this.
  4. EdtheAussie Oct 13, 2016

    Posts
    999
    Likes
    1,060
    Serial number looked ok for the reference and the non-stepped dial is good for this one. Bracelet looks like the right type.
     
  5. oddboy Zero to Grail+2998 In Six Months Oct 13, 2016

    Posts
    9,217
    Likes
    23,880
    Looks alright. Movement is OK IMHO. Bezel is a later replacement, but not necessarily a deal breaker. I'd like to see the original hands if possible.
     
    EdtheAussie likes this.
  6. Banner Roar Oct 13, 2016

    Posts
    1,014
    Likes
    2,580
    Bracelet end links are new 633 versions, were they changed at the service. Would like clasp photos. Any documentation for the service? without documents I would assume it hasn't been serviced. If you want a correct bezel will be 200-500 USD depending on condition. If it was an Omega service all of things could be available and be put back on.
     
    EdtheAussie likes this.
  7. Maganator Oct 13, 2016

    Posts
    1,170
    Likes
    1,729
    It is the right style of bezel though, is it not?

    No accent over E, dot next to 70 and next to 90.

    Or are you basing that on its condition?

    Not saying you're wrong. I am still trying to get my head around the different bezels. :)
     
    EdtheAussie likes this.
  8. WurstEver Oct 13, 2016

    Posts
    436
    Likes
    1,587
    I don't have my MWO in front of me, but I do own a -74 that I believe is all original and to my eye the TACHYMETRE text looks smaller on the example in the OP. Here's a picture of mine in another thread for comparison ...

    https://omegaforums.net/threads/ghost-bezel-thread.42017/page-2#post-494178

    Of course, this doesn't necessarily mean it's incorrect. Need to consult MWO.
     
    EdtheAussie likes this.
  9. oddboy Zero to Grail+2998 In Six Months Oct 13, 2016

    Posts
    9,217
    Likes
    23,880
    mainly, the serif on the numbers.. lack of the drop serif indicates the more modern bezel. a 70's bezel should have the serif.

    http://speedmaster101.com/base500-bezel-identification/
     
    Foo2rama likes this.
  10. cicindela Steve @ ΩF Staff Member Oct 13, 2016

    Posts
    15,047
    Likes
    23,791
    Well here ya go
    1600.jpg
     
    Tubber and oddboy like this.
  11. Banner Roar Oct 13, 2016

    Posts
    1,014
    Likes
    2,580
    On my 71, 76 they have the identical same style of Bezel and they match speedy101. This has a bezel I have not seen before but is known of. The small tachy without accent over E was apparently used in the 90's on some LE watches. Notice on other bezel's the 4 has a flat top and the 7 has a more accentuated drop on older bezels.

    The mid and right are 70's, the left is 80/90's

    upload_2016-10-13_14-3-49.jpeg
     
    Edited Oct 13, 2016
  12. Maganator Oct 13, 2016

    Posts
    1,170
    Likes
    1,729
  13. Archer Omega Qualified Watchmaker Oct 13, 2016

    Posts
    26,470
    Likes
    65,628
    Not really...see red arrow...

    [​IMG]

    Movement does have one visible problem - broken operating lever spring...so will need a new spring, plus servicing to find the portion that is missing. As it stands the chronograph will not function properly, because the start/stop pusher won't work - the operating lever will not return to it's home position.

    Cheers, Al
     
  14. EdtheAussie Oct 13, 2016

    Posts
    999
    Likes
    1,060
    Wow, thanks for all the comments guys! I'll contact the seller with a few q's and see what happens.
     
  15. DLT222 Double D @ ΩF Staff Member Oct 13, 2016

    Posts
    5,175
    Likes
    4,555
    I can tell you he wants 3750 AUD as his best price