Community Stories

Seamaster Heritage 300 clasp specs needed..

M'Bob
Posts
7,177
Likes
23,253
I measured the distance between three holes on an older flat-link bracelet clasp. It’s 6mm.

I understand on the current, 2nd generation Seamaster 300 Heritage clasp, there are also three micro adjustment holes, but I’m guessing the spread is not as large. Can anyone give me an accurate measurement of the distance between the three holes? Thanks.
Edited:
 
502 to right
Posts
1,078
Likes
1,098
M'Bob M'Bob
I measured the distance between three holes on an older flat-link bracelet clasp. It’s 6mm.

I understand on the current, 2nd generation Seamaster 300 Heritage clasp, there are also three micro adjustment holes, but I’m guessing the spread is not as large. Can anyone give me an accurate measurement of the distance between the three holes? Thanks.
I measure 2mm between each of the three settings. So 4mm between the tightest setting vs. the loosest setting.
 
M'Bob
Posts
7,177
Likes
23,253
502 to right 502 to right
I measure 2mm between each of the three settings. So 4mm between the tightest setting vs. the loosest setting.

Appreciate it.
 
Sign up or log in to reply...

Similar threads

W

Omega Seamaster Heritage 300 bezel

Winston007 Modern Omega Watches
bgrisso
bgrisso
Posts
13
Views
4K
G

Blue Seamaster Heritage 300 strap colors….

gb34312 Modern Omega Watches
s2000_driver
s2000_driver
Posts
3
Views
3K
ErichPryde

Seamaster Heritage clasp failure (2nd gen)

ErichPryde Modern Omega Watches
ErichPryde
ErichPryde
Posts
6
Views
2K