Seamaster 300 Heritage Clasp Micro Adjust Specs

M'Bob · Oct 12, 2025

I measured the distance between three holes on an older flat-link bracelet clasp. It’s 6mm.

I understand on the current, 2nd generation Seamaster 300 Heritage clasp, there are also three micro adjustment holes, but I’m guessing the spread is not as large. Can anyone give me an accurate measurement of the distance between the three holes? Thanks.

502 to right · Oct 14, 2025

M'Bob
I measured the distance between three holes on an older flat-link bracelet clasp. It’s 6mm.

I understand on the current, 2nd generation Seamaster 300 Heritage clasp, there are also three micro adjustment holes, but I’m guessing the spread is not as large. Can anyone give me an accurate measurement of the distance between the three holes? Thanks.

I measure 2mm between each of the three settings. So 4mm between the tightest setting vs. the loosest setting.

M'Bob · Oct 14, 2025

502 to right
I measure 2mm between each of the three settings. So 4mm between the tightest setting vs. the loosest setting.

Appreciate it.

Seamaster 300 Heritage Clasp Micro Adjust Specs

M'Bob

502 to right

M'Bob

Similar threads

Seamaster 300 Heritage: 1st Gen Titanium vs 2nd Gen

Speedmaster co-axial chrono 9300 bracelet clasp micro adjustment mod possible?

Would you buy a Seamaster 300 Heritage with a hesalite crystal?

Looking for advice on verifying steel bracelet for Seamaster 300 heritage

Omega Seamaster 300 Heritage Liquidmetal - 233.30.41.21.01.001 ( excellent )

Omega Seamaster 300 Heritage - Black - 234.30.41.21.01.001 ( excellent )