Omega Speedmaster ref 105.003-65 aka Ed White

Posts
542
Likes
1,806
I have for sale an Omega Speedmaster ref 105.003-65.

Brand: Omega
Model: Speedmaster
Reference Number: 105.003-65
Year: 1966
Serial Number: 24011552
Material: Stainless Steel
Movement: Cal. 321
Case Diameter: 39.5 mm
Lug Width: 19mm


Case is very honest, polished but still very sharp and thick. Bevels are still visible.

Crown is not orginal, it was changed during a service.

The dial is in excellent condition and has turned a slight brown. The patina is deep and beautiful and matches the hands perfectly. Tritium reacts correctly with UV light

Bezel is a period correct DO90

Crystal is original

bracelet is not included

The movement is clean and in full working order with the chronograph functioning smoothly.

Watch runs well and keeps good time, I have no history of service.

I am asking 13.5k Euro or 15K USD/CHF shipped. I am not interested in trades

Face to face is preferred, in live in Geneva, Switzerland. Bank/revolut wire is accepted. I can send the watch from the UE if needed.

I have plenty of references, I can send more photos upon request
Edited:
 
Posts
1,672
Likes
8,794
"...on behalf of a close collector friend of mine..."

This is also not allowed...
 
Posts
10,446
Likes
16,336
It is a rule of the sales area that you must own the item you are selling.
 
Posts
8,711
Likes
14,617
It is a rule of the sales area that you must own the item you are selling.
Reference to selling it for a friend was removed from the listing.
 
Posts
5,522
Likes
9,437
That should be okay -- the OP is now the Seller from a sales perspective, vs just an agent. So the OP carries the responsibilities/ obligations, not the actual behind-the-scenes owner.
 
Posts
498
Likes
911
Sorry to harp on this, but just want to clarify there is no hour creep? Every picture with chrono running has minutes still at “0” but the chrono hour counter advanced. Even in new pic from watchmaker, chrono seems to be zeroed out but hour counter showing nearly 5hrs elapsed.
 
Posts
542
Likes
1,806
Sorry to harp on this, but just want to clarify there is no hour creep? Every picture with chrono running has minutes still at “0” but the chrono hour counter advanced. Even in new pic from watchmaker, chrono seems to be zeroed out but hour counter showing nearly 5hrs elapsed.

see the video I posted on YT :
 
Posts
4,114
Likes
16,324
If the 321 has chrono creep, the chrono hours counter (at 6) will reset to 0 like on the video above. Then move again even if chrono is not running.

Does it move alone even when the chrono function is not running? That's the question from @DRjre086 but you can't prove it with a 10 sec video 😉
 
Posts
542
Likes
1,806
If the 321 has chrono creep, the chrono hours counter (at 6) will reset to 0 like on the video above. Then move again even if chrono is not running.

Does it move alone even when the chrono function is not running? That's the question from @DRjre086 but you can't prove it with a 10 sec video 😉

your'e right, watch will have a service to get that fixed