Omega Speedmaster Reduced Pusher Screw

minute.repeater · Dec 19, 2023

Hi all,

I am currently looking for the screw that holds the pusher cap in place for an Omega Speedmaster Reduced. They have a flat head instead of the long head used in different older models.

The thread on them is quite small and can break quite easily ( lesson learned ).

Does anyone know where to find a spare screw? Thanks

Archer · Dec 20, 2023

The screw is not sold as a separated part. These pushers are press fitted into the case, so they are pressed in as a unit, and are not disassembled for that.

The are not really designed to come apart, except when you are replacing them. The cap is removed for that so you can use a splined tool to loosen the tune that is pressed into the case. Often when you try to unscrew the screw for the cap, it will snap off. Now you are left with a piece of that screw stuck in the threads of the cap, held in with Loctite. So the easiest thing is to replace the whole unit.

The part number for the entire pusher is 086ST0079.

Omega Speedmaster Reduced Pusher Screw

minute.repeater

Archer

Similar threads

Omega Speedmaster Reduced

Help Verifying Authenticity of Omega Speedmaster Reduced – Possible Crown Replacement

Omega Speedmaster Reduced - Now Purchased

I bought an Omega Speedmaster Reduced 3150.50.00

What is the original factory Omega Speedmaster Reduced steel/gold bracelet/strap DA 175 0032?

<Question> Help me clarify " Omega Speedmaster Reduce (3510.50) " *Move threads