Omega 1001 Stop Second Lever Install...

Hi all ,

I disassembled my Omega Constellation Cal. 1001 and did not get a chance to see where and how this stop lever part is installed . I thought it gets installed under the train bridge , but I dunno .
I searched the internet looking for a hint on the reinstall location with no luck .

Any help is appreciated .

Thank You .......

Got it..... When I took the drive train bridge off I remember that the Stop Lever was stuck to the bottom of the bridge plate , but I did not see the orientation or placement on the main plate . In looking at the Omega pic I posted , I thought that the lever was under the date corrector arm and both were held in place by the setting lever spring .

But NO ,... The date corrector arm has a post on the backside under the star that protrudes through the plate and fits the small hole in the Stop Lever plate . The larger hole in the plate is the pivot point . Pulling the crown to the third position moves the date lever , which moves the Stop Lever so its small spring arm touches the BALANCE to stop the second hand .