This is my first dresser omega . Bought it from a friend .Need some little tinkering . First does anyboby now the model . As i haven't open it yet . Don't now how ?Is it a split stem ? The dial looks like it is loose in the case . I have a little golden ring that i think shall be under the crystal . He said the dialfeet are broken ? Hope not but if they are i will have to dialdot the dial .

 

Nice! Looks similar to my first vintage Omega!

 

I love the dress watch look, and the speedmaster man on the moon look the most.

 

First i took of the ring around the crystal with a small knife .Easy peasy . And poped the crystal with a syringe . But how do i get in to the movement and get the dial of . There seam to be a ring around the edge of the case . BTW the crown was a split stem . Need to find a new or good looking one .

 

Why no Seamaster logo on the back of the case ?

 

Mine has the SM logo on the back...

 

Rotate the brass ring that is around the movement so that the slots in that ring line up with the movement clamps, and then the movement will drop out.

 

Thanks. Got it. Needs some Tlc. It's a 613 movement. And the case reference is 135.020. One of the dial pins are broken.

 

some watchmakers have specific machines to resolder dial feet - might be worth investigating....

 

Can anyone tell me if the Seamaster logo should be there or it should look like this . The case is a 135.020SP and the movement is a 613 . Can it really be worn off ?

 

I have seen them without logo before, but i dont know if it have been because there have been an engraving once and it have been removed, or maybee the early versions have been without the logo.