Community Stories

Looking for information / advice about Constellation 14381.

Milkfloat
Posts
2
Likes
1
Hi everyone, first time poster asking about a watch and providing terrible photos. I guess I am going to get slammed 馃槈
I am looking for some information and advice about my Grandfather's watch which I recently inherited, I have scanned bits of the forum for a while, but am still not sure what I have and what I should do with it. The watch was bought in 1960 by my Grandmother for my Grandfather (both now deceased) and I have the receipt, I am not sure why she bought it for him as it was not near a significant birthday or anniversary, but he was a lucky man.

In the forum's opinion, how unmolested and what is the conditions (I suspect that at least the crown is not original) and can anyone confirm the model number as I have been unable to match the claimed model number with other photos on the internet? What are all the little scratched in numbers on the inside of the case back, is that done whilst it is being serviced? What should I do to keep this in good condition or restore it to a good condition? I am unlikely to wear it much but at the moment don't really want to sell it, however I would like an idea of what it is worth in case I need to put it on my home insurance.

The serial number of the 551 movement is 17018387 and I read the model as 14381-7-SC.

Thanks everyone and sorry if I have commited a forum faux pas with my post.

20190826_204747092_iOS.jpg 20190827_151423139_iOS.jpg 20190827_152542569_iOS.jpg 20190827_154711633_iOS.jpg 20190827_152639015_iOS.jpg 20190827_163350187_iOS.jpg 20190827_163648545_iOS.jpg
 
ChrisN
Posts
2,219
Likes
4,945
Hello and welcome!

It's an Omega 14381 as you know and a Google search should bring up other examples. The -7 is an iteration of the basic design as I understand it so, probably the first batch was -1, the second batch -2 and so on. Sadly, no image or many extra details on the Omega site.

The little scratched numbers are old watchmaker's marks, as you suspect. Nobody does this anymore and we just supply a receipt with the model and serial as the guarantee.

It looks all original to me, with the exception of the crown (possibly) but the bracelet doesn't appear to be an Omega one and I'd get rid of it as it will probably damage the lugs. If it were mine, I'd service the movement, polish/replace the crystal, clean the case, replace the caseback seal and crown, replace the bracelet and wear it. Don't let anyone work on the dial/hands or polish the case (but, that's up to you).

If you were selling, then 拢1000-1500 would be the price range I'd estimate so, insure for at least that. These are desirable watches and one that is unmolested is always nice to see.

I hope this helps a little and you get to enjoy the watch.

Cheers, Chris
 
Milkfloat
Posts
2
Likes
1
Thanks Chris.

Would people suggest getting the watchmaker to remove the detritus on the dial?
Edited:
 
ChrisN
Posts
2,219
Likes
4,945
hoipolloi hoipolloi
It is too optimistic, I think.
Yes, I might be Hoi but, watches are expensive in UK...馃檨

Milkfloat Milkfloat
Thanks Chris.

Would people suggest getting the watchmaker to remove the detritus on the dial?
I don't see anything particular on the dial but, if there are dust/dirt particles sitting on the surface, I'd expect the watchmaker to remove them. Find someone you want to use and ask them what they would do to the watch. We are all very busy so, expect that you won't get anyone to service it until October or November, and possibly later...

Cheers, Chris
 
Khanh Luu
Posts
13
Likes
5
ChrisN ChrisN
Hello and welcome!

It's an Omega 14381 as you know and a Google search should bring up other examples. The -7 is an iteration of the basic design as I understand it so, probably the first batch was -1, the second batch -2 and so on. Sadly, no image or many extra details on the Omega site.

The little scratched numbers are old watchmaker's marks, as you suspect. Nobody does this anymore and we just supply a receipt with the model and serial as the guarantee.

It looks all original to me, with the exception of the crown (possibly) but the bracelet doesn't appear to be an Omega one and I'd get rid of it as it will probably damage the lugs. If it were mine, I'd service the movement, polish/replace the crystal, clean the case, replace the caseback seal and crown, replace the bracelet and wear it. Don't let anyone work on the dial/hands or polish the case (but, that's up to you).

If you were selling, then 拢1000-1500 would be the price range I'd estimate so, insure for at least that. These are desirable watches and one that is unmolested is always nice to see.

I hope this helps a little and you get to enjoy the watch.

Cheers, Chris
F49B6E7D-4DE2-46F7-A751-B5B7A2BFA372.jpeg
 
MSNWatch
Posts
6,618
Likes
11,373
For reference - here is one in 18k that is "unmolested."

28033390486_130ac3cf06_z.jpg
 
Sign up or log in to reply...

Similar threads

G

Looking for information about this T.E. Lawrence pocket watch

gtodadubble33 Vintage Omega Watches Help, Discussion and Advice
sheepdoll
sheepdoll
Posts
2
Views
232
magnavi

Looking for information on this Seamaster Chronograph, cal. 321

magnavi Vintage Omega Watches Help, Discussion and Advice
magnavi
magnavi
Posts
8
Views
996
E

Looking for information on possible prototype or rare variant case Omega ref 145.016

Esterlism Vintage Omega Watches Help, Discussion and Advice
Pastorbottle
Pastorbottle
Posts
6
Views
400
bgrisso

Looking for information about this pocket watch

bgrisso Open Discussion
Canuck
Canuck
Posts
11
Views
427
H

Looking for information for police report on stolen watch

hooligan911 Open Discussion
gatorcpa
gatorcpa
Posts
16
Views
691
S

Help me about Constellation 168.005

svnts Vintage Omega Watches Help, Discussion and Advice
Peemacgee
Peemacgee
Posts
10
Views
4K