Looking for a really tough watch

Posts
920
Likes
3,832
Don’t know if I’d consider this a really “tough” watch but if I want to wear at watch and not worry about it taking a beating or dealing with water/sand/etc., this is my go to:

Luminox XS.3001.F
 
Posts
23,175
Likes
51,730
The cold temperatures mentioned are an interesting point. I would think a digital display would have more problems at -20C than a mechanical.

This is true. The low-temp LCD displays are limited to about -20˚C, and start to fade. Many mechanical watches also recommend -20˚C as a lower limit, but I've routinely worn many mechanical watches down to ambient temperatures of -30˚C, and nothing bad has ever happened. Unfortunately, that is a typical December morning temperature in Crested Butte, where we spend a lot of time in the winter. Of course, the actual temperature of the watch on my wrist is probably warmer than ambient.
Edited:
 
Posts
22
Likes
61
Thank you guys. Thanks for all the suggestion. Considering the 300M was a close second choice when I bought my speed, I will get one eventually. I wasn't sure for the cold temperature but if she can do it, it's definitely my choice!
 
Posts
5,059
Likes
15,577

The new ones are solar, and have automatic time synchronization via RF signal (if there are any in Canada)…
 
Posts
22
Likes
61
The new ones are solar, and have automatic time synchronization via RF signal (if there are any in Canada)…

I'm really into mechanical watch tbh, I know they are good but I personally don't like wearing them, but thanks for the suggestion
 
Posts
2,945
Likes
16,953
This is true. The low-temp LCD displays are limited to about -20˚C, and start to fade. Many mechanical watches also recommend -20˚C as a lower limit, but I've routinely worn many mechanical watches down to ambient temperatures of -30˚C, and nothing bad has ever happened. Unfortunately, that is a typical December morning temperature in Crested Butte, where we spend a lot of time in the winter. Of course, the actual temperature of the watch on my wrist is probably warmer than ambient.
Some of the most extreme temperatures can be found in space of course and mechanicals are working well enough there when worn outside a space suit. You can keep those -30C temps though, no thanks!
 
Posts
483
Likes
1,872
I'd definitely go with Sinn 😉
I had many of them and right now I am left with only one, which is my favorite of their catalogue the EZM 13.1

Here is a photo of it :

Sinn watches are engineered to be used in tough condition. For instance, this model is tested from –45 °C to +80°C ; and also tested to magnetism.

Another model tested to very low temperature is the ARKTIS II, here is a stock photo :


That would be my recommendation for you since you opted for the seamaster 300 - which is a "dressy" tool watch with high polish.
Edited:
 
Posts
22
Likes
61
I'd definitely go with Sinn 😉
I had many of them and right now I am left with only one, which is my favorite of their catalogue the EZM 13.1

Here is a photo of it :

Sinn watches are engineered to be used in tough condition. For instance, this model is tested from –45 °C to +80°C ; and also tested to magnetism.

Another model tested to very low temperature is the ARKTIS II, here is a stock photo :


That would be my recommendation for you since you opted for the seamaster 300 - which is a "dressy" tool watch with high polish.

Have to admit, I like the EZM 13.1. Definitely gonna check some review, thanks!
 
Posts
744
Likes
1,766
If I were looking for a true beater I would consider one of these watches from Scurfa. The owner of the company is a professional commercial diver and test's the watches himself. Lots of colour variations and quite cool.