Longines Mark 11 prototype at auction

Posts
80
Likes
168
https://www.the-saleroom.com/en-gb/...fe7d?queryId=12cecc463dcfca646efa20fc225a2076

From Man is (Still) Not Lost: Revisiting the Mark 11 Navigational Wristwatch
Khurram Khan, Thomas Koenig and Greg Steer

"1.2.1. The Longines Mk. 11

In 1950 Longines submitted under the Mk. 11 specification test samples that were 44 mm in diameter, fitted with a calibre 15.68N. This calibre is identical to the Longines 14.68N calibre with the exception of the fact that the 15.68N calibre has stop-seconds work (‘hacking’), a feature required in the Mk. 11 spec. The Longines reference for these Mk. 11 prototypes was 6111-1. Baume, the UK agent for Longines, sent only a few of these watches to the RAF via Goldsmiths & Silversmiths Co. in spring 1950 for testing purposes. We do not know how many of these test watches Longines provided, but the number may have been somewhere in the mid-double digits. What relationship these military prototypes had to the ‘Radar Proof’ Longines watches, which were clearly intended for the civilian market, is not known. It is evident, however, that Longines was engaged in protecting their watches from the magnetic fields emitted by radar devices, and not only in the context of prototypes for the RAF.

No documents explaining why the RAF did not commission any more Mk. 11 watches from Longines or JLC have been found up to now. Oral tradition supports the conclusion the reason was twofold: a watch with a diameter of 44 mm was quite big for use in daily life, on duty as well as during leisure time and therefore not only uncomfortable, but also damage-prone (see page 15 for how the Mk. 11 was used in the RAF). Additionally, the cal. 15.68N was not as easy to service as the IWC cal. 89.

Shortly thereafter, apparently, the Indian Air Force purchased a small batch of watches nearly identical to the Longines Mk. 11 prototype, which collectors nicknamed the ‘Big Indian’; at least, in 1952 the watches were shipped to an Indian address. The Longines reference for this watch was 6111-2 and these watches were fitted with a 14.68N calibre - the ‘non-hacking’ calibre. For that reason these watches no longer complied with the Mk. 11 specification. Accordingly, only the ref. 6111-1 prototypes were marked 6B/346 on the case back (and the identification number xxx/49, which was typical of the RAF), while the watches for the Indians were only marked with the broad arrow and a serial number, Figures 6a to 6c.

More information about the Longines Mk. 11 can be found in a variety of military watch internet forums. However, even in those specialised forums, information about the Longines Mk. 11 is sparse. Longines itself has nearly no information."

 
Posts
1,529
Likes
4,432
So you have to wonder, why does the prototype have issue number 172, it is higher than the regular issued numbers. From what little I know, I would assume this was the 72nd produced watch in the contract.
Edited: