Identify this watch and his value

Posts
3
Likes
0
Hi! I'm new to watches and today I found this omega of my grandfather and I wanted to know a little more about it
This watch I thin is a caliber 268 or 269 and it is from the 60/70s.The number in the back is 15130,and it says 'Fond acer inoxydable'.Thank you
 
Posts
12,631
Likes
17,059
Pretty sure that is not an original Omega case. Not sure if the dial is original either

If I am correct, the watch will have very little value.

Sorry to be the bearer of bad news,
gatorcpa
 
Posts
3,892
Likes
8,740
Not looking good so far but it would help if we could see a picture of the movement inside and a pic of the inside case back.
 
Posts
239
Likes
466
The cases from that period I think they don't have anything written on the back..only inside. So pictures from inside will tell everything.
 
Posts
282
Likes
123
The dial is original but wery cleaned, seconds scale missing. The case looks to be stainless steel and probably made by Omega. The case back is’t omega. It’s from some watch brand like -Tressa, wich come with UT6310/25 movement.
 
Posts
17,635
Likes
26,752
The dial is original but wery cleaned, seconds scale missing. The case looks to be stainless steel and probably made by Omega. The case back is’t omega. It’s from some watch brand like -Tressa, wich come with UT6310/25 movement.

Don’t think the case or dial is Omega. The dial furniture is not exactly up to spec for Omega. Also a caseback from a different case fitting is not exactly high.
 
Posts
282
Likes
123
Don’t think the case or dial is Omega. The dial furniture is not exactly up to spec for Omega. Also a caseback from a different case fitting is not exactly high.
Here is the same dial.
 
Posts
17,635
Likes
26,752
Here is the same dial.

Not quite and that’s my point. Yours has beveled furniture on the dial that catches light combined with a sunburst/soliel finish.

The op has thin flat cheap looking dial furniture, almost looks printed on with thick ink. Clear sign that’s it at best a redial at worst fake.
 
Posts
3
Likes
0
The watch is original,becasue my grandfather bought it from an original store and he hasn't done anything to it,he didn't change a piece of it.I wanted to know a little more about it,i know it's not fake
 
Posts
17,635
Likes
26,752
The watch is original,becasue my grandfather bought it from an original store and he hasn't done anything to it,he didn't change a piece of it.I wanted to know a little more about it,i know it's not fake

Can you show us pictures of the inside of the caseback and movement?

What country did he buy it in?
 
Posts
12,631
Likes
17,059
The watch is original,becasue my grandfather bought it from an original store and he hasn't done anything to it,he didn't change a piece of it.I wanted to know a little more about it,i know it's not fake
He may not have changed anything, but it is likely that the watch was serviced by a watchmaker at least once. Back then, the manufacturers used to recommend a service every 2-3 years.

Watchmakers used to refinish dials routinely and could even replace a worn case if the customer asked. This is one reason why totally original watches bring a premium in the marketplace. Relatively few 50-60 year old watches are totally original anymore.

Hope this helps,
gatorcpa
 
Posts
537
Likes
356
Welcome. My original Omegas had refinished dials when they were serviced. It was common back in the day and your grandfather probably didn't know or care. The watch is worth about $ 1,000 - $ 1,200 in my area if it's an Omega inside. The sentimental value should be much higher to you. I'd get it serviced, put a nice band on it and wear it.
 
Posts
3
Likes
0
Can you show us pictures of the inside of the caseback and movement?

What country did he buy it in?
He bought it in italy,at the moment i can't open the case,in the near future i will send you the pictures