- Posts
- 11
- Likes
- 9
How much would it cost to restore Omega Seamaster Deville??
- Posts
- 7,538
- Likes
- 34,608
cristos71
·Well the movement looks to have barely been touched in all those years, the screw heads are in great shape. The case looks in good shape too, so depending on the rest I'd think it could be a watch to invest the €150 or so a 565 would probably cost to service. Parts would be extra, although I'd wager this one doesn't need much more than a clean and lubrication. A correct crown and crystal around €100.
How's the rest of it?
How's the rest of it?
- Posts
- 4,963
- Likes
- 18,397
Shabbaz
·I think it will probably costs around EUR 300 if I bring it to my watchmaker. 175 with tax for a cal 565. EUR 75 for a original omega plexi and 50ish for a crown. If you bring it to a omega service centre you can double or triple that...
- Posts
- 1,511
- Likes
- 4,749
michael e
·I might have the plexi and crown in stock if you give me the case number, It looks like you might need the female part of the split stem too.
Thanks, Michael
Thanks, Michael
Edited:
- Posts
- 11,971
- Likes
- 20,814
Davidt
·There's a key picture missing here as whether it's worth it or not depends on the condition of the dial.
If the dial is poor it may only be worth doing it if it has sentimental value.
If the dial is good it's certainly worth doing.
If the dial is poor it may only be worth doing it if it has sentimental value.
If the dial is good it's certainly worth doing.
- Posts
- 11
- Likes
- 9
jimil6911
·Thanks guys! The dial is in good condition and it is sentimental value so I think I'll give it a shot.
- Posts
- 21,626
- Likes
- 48,995
Dan S
·Come on @jimil6911, post more photos! What a tease ... 😀
- Posts
- 11
- Likes
- 9
- Posts
- 21,626
- Likes
- 48,995
Dan S
·I have a feeling this will clean up very nicely. Try to resist over-polishing the case, you want retain the original lines of the case as much as possible. And if you tell the repair shop to polish the case to get rid of the scratches, they will most likely just use a buffing wheel, and smooth out the shape of the case in the process. It's better to live with some scratches.
- Posts
- 11
- Likes
- 9
jimil6911
·I have a feeling this will clean up very nicely. Try to resist over-polishing the case, you want retain the original lines of the case as much as possible. And if you tell the repair shop to polish the case to get rid of the scratches, they will most likely just use a buffing wheel, and smooth out the shape of the case in the process. It's better to live with some scratches.
Thanks for the advice here! Absolutely in agreement here, cannot have a vintage watch not looking vintage. Is there a possibility here that it cannot be fixed at all? Apologies for the noobie questions.
- Posts
- 804
- Likes
- 896
- Posts
- 21,626
- Likes
- 48,995
Dan S
·Is there a possibility here that it cannot be fixed at all?
Very unlikely IMHO; I would happily take a chance on this watch assuming the case is decent (still no case photo). The movement looks very clean and untampered-with at first glance. If there was some damage associated with the loss of the crown/stem, some repairs may be needed (possibly with some replacement parts), but I am confident that a watchmaker with vintage Omega experience will put this watch right for you.
Just for my own education, how can you tell?
Not a single scratch on the movement that I can see. The screwheads seem pristine. No discoloration due to moisture intrusion. Just a really clean looking movement given the superficial view. No apparent water damage to the dial. Parts appear original. It has all the signs of a watch that was worn until it stopped working, and then put in a drawer.
- Posts
- 11
- Likes
- 9
jimil6911
·Hi all,
Just wanted to update everyone here. Finally put in the work and here is the result. Apparently, it was difficult getting an original crystal since there is a metal ring that flushes against the dial. So a little buffing actually took off most of the scratches. Cleaning was needed and a few replacement parts. Let me know what you all think! I'm very happy with the result. Everyone here was a big part of me getting my first vintage so thank you very much!
Just wanted to update everyone here. Finally put in the work and here is the result. Apparently, it was difficult getting an original crystal since there is a metal ring that flushes against the dial. So a little buffing actually took off most of the scratches. Cleaning was needed and a few replacement parts. Let me know what you all think! I'm very happy with the result. Everyone here was a big part of me getting my first vintage so thank you very much!
- Posts
- 1,433
- Likes
- 1,575
shaun hk
·Well done, if you continue to get it serviced every few years it will keep going for decades to come. And thanks for coming back to show us the finished result, it looks great !
