Help with re plating a vintage Omega Geneve

Posts

8

Likes

13

Clarke_1985

·Sep 19, 2023

Hi I was hoping for some advice about re plating a vintage watch. It’s an omega geneve; I’m based in New Zealand but happy to send the watch to the best place to have this carried out.
Any help or thoughts greatly appreciated.

Omega Geneve
Calibre 565
Stainless Steel Base coated with 20 microns

“Carrure Lunette Plaque or G 20 microns” is on the inside of the case back.


Thank you

 

Posts

10,442

Likes

16,327

padders

·Sep 19, 2023·Oooo subtitles!

Are you willing to spend more than it’s worth? Serious question as everything is possible but not everything is economically wise. If you’ve already stripped the case then there are indeed plating services available, though they are more used to dealing with trade customers. I know of one in the uk who did a bezel for me and I’ve heard good things about Replatit (sp) who I think are either in NW US or Canada, I forget which.

 

Posts

8

Likes

13

Clarke_1985

·Sep 19, 2023

Honestly I’m happy to spend whatever… it’s of sentimental value. Appreciate it doesn’t make a lot of economic sense but that’s fine. I had a look at replateit but they don’t accept courier packages (dhl, FedEx) from what I could read which makes it difficult when sending from NZ.

 

Posts

2,006

Likes

7,160

Tubber

·Sep 19, 2023

padders

Are you willing to spend more than it’s worth? Serious question as everything is possible but not everything is economically wise. If you’ve already stripped the case then there are indeed plating services available, though they are more used to dealing with trade customers. I know of one in the uk who did a bezel for me and I’ve heard good things about Replatit (sp) who I think are either in NW US or Canada, I forget which.

Would you care to share who did the work in the UK?

 

Posts

5,598

Likes

9,422

watchyouwant

·Sep 19, 2023

Clarke_1985

Honestly I’m happy to spend whatever… it’s of sentimental value. Appreciate it doesn’t make a lot of economic sense but that’s fine. I had a look at replateit but they don’t accept courier packages (dhl, FedEx) from what I could read which makes it difficult when sending from NZ.

Pretty sure, our Canadian members can help here. Courier to them. They forward to the workshop. Same in reverse. Just make sure, your parcel contents description does not attract extra cusoms charges ....

 

Posts

13

Likes

10

T-Steve

·Sep 19, 2023

Another recommendation of Replateit. I spent about $300 and they replated my quite rough Hamilton. It turned out AMAZING.

I'll dig up a picture if I can find one.

 

Posts

6,190

Likes

21,195

pdxleaf

·Sep 19, 2023·"I cut it TWICE and it's still short!"

T-Steve

Another recommendation of Replateit. I spent about $300 and they replated my quite rough Hamilton. It turned out AMAZING.

I'll dig up a picture if I can find one.

Their new address is a used car lot. That's a little disconcerting. So they're legit?

 

Posts

341

Likes

2,598

HamDoctor

·Sep 20, 2023

pdxleaf

Their new address is a used car lot. That's a little disconcerting. So they're legit?

They have certainly been around for a long time, and have been recommended time and again. Haven't used them myself yet, but they seem to be quite professional (lots of options to choose from), and I have seen the work they have done on several occasions in forums. Looked quite good.

 

Posts

10,442

Likes

16,327

padders

·Sep 20, 2023·Oooo subtitles!

Tubber

Would you care to share who did the work in the UK?

I'll try to dig out the details, it was a couple of years ago, but it was a backstreet trade place in the Birmingham Jewellery Quarter who aren't easy to find and may not even have a web presence, hence my comment about trade customers.

 

Posts

29,672

Likes

76,830

Archer

·Sep 20, 2023·Omega Qualified Watchmaker

watchyouwant

Pretty sure, our Canadian members can help here. Courier to them. They forward to the workshop. Same in reverse. Just make sure, your parcel contents description does not attract extra cusoms charges ....

They are in the US...

 

Posts

869

Likes

3,632

rendo

·Sep 20, 2023·faux legend

pdxleaf

Their new address is a used car lot. That's a little disconcerting. So they're legit?

It looks like they are renting a portion of the dealership. I recently sent them a set of hands for re-plating and heard back from Peter with a quote.

 

Posts

6,190

Likes

21,195

pdxleaf

·Sep 20, 2023·"I cut it TWICE and it's still short!"

HamDoctor

They have certainly been around for a long time, and have been recommended time and again. Haven't used them myself yet, but they seem to be quite professional (lots of options to choose from), and I have seen the work they have done on several occasions in forums. Looked quite good.

Their instagram photos show amazing work.

 

Posts

9,737

Likes

54,454

gbesq

·Sep 20, 2023

Never used them but everything I’ve read here and elsewhere has praised the quality of their work. If I
remember correctly, they do ask that you remove the dial and movement from the watch before sending the case to them for replating.

 

Posts

2,006

Likes

7,160

Tubber

·Sep 20, 2023

padders

I'll try to dig out the details, it was a couple of years ago, but it was a backstreet trade place in the Birmingham Jewellery Quarter who aren't easy to find and may not even have a web presence, hence my comment about trade customers.

Thanks @padders but I wouldn't go to any trouble to find the address. It was more of a curious query.

 

N

Posts

129

Likes

157

Nickn

·Sep 21, 2023

Look on eBay you might find a better case that doesn’t need plating

 

Posts

7,651

Likes

21,952

Syrte

·Sep 21, 2023

Maybe the guy who redid those lugs could also help?
https://omegaforums.net/threads/universal-compur-estate-sale-find.87075/page-3

No idea if he had experience with replating jobs, it doesn’t look like it but his website says he works with international clients including New Zealand.
https://www.watchcaserepair.com/

 

Posts

13

Likes

6

TiccTacc

·Sep 21, 2023

Hi we have several companies at hand in Germany who do gold plating. If the case is stripped you pay 90-110 Euro max. you can always contact us for a contact Although its done under from your perspective.

 

Posts

1,925

Likes

4,958

Matty01

·Sep 22, 2023

padders

Are you willing to spend more than it’s worth? Serious question as everything is possible but not everything is economically wise. If you’ve already stripped the case then there are indeed plating services available, though they are more used to dealing with trade customers. I know of one in the uk who did a bezel for me and I’ve heard good things about Replatit (sp) who I think are either in NW US or Canada, I forget which.

Replatit were in Canada methinks now in the US
https://www.replateit.com/
I haven’t used their services but have seen a Rolex they worked on and it was exceptionally well presented

 

Posts

327

Likes

821

Redondo444

·Sep 22, 2023

TiccTacc

Hi we have several companies at hand in Germany who do gold plating. If the case is stripped you pay 90-110 Euro max. you can always contact us for a contact Although its done under from your perspective.

Would be interested if you can name/recommend a few 😀

 

Posts

1,666

Likes

6,904

felsby

·Sep 22, 2023·I don't see any option in settings or profile

ReplateIt did a terrific job at modest costs for me. Highly recommended, but as Redondo says, there are european shops as well.