Great-grandfathers Omega Watch

Posts
5
Likes
6
Been searching for more information about this watch that I got from my grandfather when I was in highschool and just started wearing it again. It is running but loses time in a couple hours or so. Finally opened it up to find out more information and looks like it is a Cal. 266. Ive been trying to research the model name, but don't seem to be able to find much. Also, wanting to find a more correct watchband for this watch if anyone has any suggestions.
 
Posts
297
Likes
266
I like it!!! I can't give you any specifics on it, but I can say it's deserving of a thorough service by someone who specializes in vintage Omegas. I wouldn't wear it until it's serviced. Also, get that band off it immediately!! The inside of your lugs are going to get destroyed!!!
 
Posts
5
Likes
6
I like it!!! I can't give you any specifics on it, but I can say it's deserving of a thorough service by someone who specializes in vintage Omegas. I wouldn't wear it until it's serviced. Also, get that band off it immediately!! The inside of your lugs are going to get destroyed!!!
Thanks for the advice! Have any good advice on where to find a good band to go with it!?
 
Posts
7,906
Likes
57,188
Any jeweler that sells watches will also sell straps for your watch.

probably 18mm lug width, but they can measure it

leather would be my choice
 
Posts
963
Likes
1,250
Lovely piece. Since there's no Omega logo visible on the inside case back, it's possible this is a locally-made gold case. Are you in the UK / do you think your great-grandfather purchased this in the UK?

Are you able to get any macro or zoomed in pics of hallmarks on the case lugs or the case back?
 
Posts
1,200
Likes
3,883
@TexOmega is correct, however if you don't find something you like at your watchmaker, I've been very happy with Bulang & Sons. Link below. There's also a good thread regarding straps...lots of other suggestions there. I'll drop the link here, but for future reference, the magnifying glass icon at the top right of the page will get you to the search area. Just type in a key word or two for what you're searching and you'll be off to the deep dark stacks of the library!

https://bulangandsons.com/collections/strap
https://omegaforums.net/threads/«wa...-buy-good-quality-leather-watch-straps.82232/

Nice watch, and even more special because you know it has been worn by family for many years! Welcome to OF
 
Posts
20,643
Likes
47,471
Lovely piece. Since there's no Omega logo visible on the inside case back, it's possible this is a locally-made gold case. Are you in the UK / do you think your great-grandfather purchased this in the UK?

Are you able to get any macro or zoomed in pics of hallmarks on the case lugs or the case back?

There is an Omega logo inside the caseback, but you need to blow up the photo and enhance the contrast. You may certainly be right about it being locally cased, however. The case maker stamp appears to say "RH" or "PH". Perhaps the OP can take a better photo where the engravings are more easily seen. He may need to try different types of lighting at various angles.

Edited:
 
Posts
963
Likes
1,250
There is an Omega logo inside the caseback, but you need to blow up the photo and enhance the contrast. You may certainly be right about it being locally cased, however. The case maker stamp appears to say "RH" or "PH". Perhaps the OP can take a better photo where the engravings are more easily seen. He may need to try different types of lighting at various angles.



Ah, I can make out the Omega logo,

Fab Swiss
Swiss Made
Plaque Or Lamine
35 Microns (35?)

Now I need to teach myself how to replicate your image tuning! 😀
Edited:
 
Posts
1,543
Likes
12,076
Depending on size it could be 2712 (35mm) or 2713 (38mm)

Used to own 2712 and @MtV has/had bigger waffle version
 
Posts
5
Likes
6
Lovely piece. Since there's no Omega logo visible on the inside case back, it's possible this is a locally-made gold case. Are you in the UK / do you think your great-grandfather purchased this in the UK?

Are you able to get any macro or zoomed in pics of hallmarks on the case lugs or the case back?
Its hard to see in the photo because the inside of the case is tarnished but I can faintly see a triangle with an omega symbol below. My grandfather was in London but much more later in his career.
 
Posts
141
Likes
57
Finally opened it up to find out more information and looks like it is a Cal. 266. Ive been trying to research the model name, but don't seem to be able to find much.
Caliber 266 is one of successors to the famous caliber 30. Prod.year was 1950-56.
 
Posts
5
Likes
6
Took some of y'all advice and got a new ostrich band. Feels much better and feels like it fits the style of the watch much more. Went around to some watchmakers here in Tokyo to see how much it would cost to service and was higher than I thought, around $500 to $900. Might because it's harder to find parts for this movement in Japan? Thinking if I should just wait till I go back to visit the US
 
Posts
20,643
Likes
47,471
Took some of y'all advice and got a new ostrich band. Feels much better and feels like it fits the style of the watch much more. Went around to some watchmakers here in Tokyo to see how much it would cost to service and was higher than I thought, around $500 to $900. Might because it's harder to find parts for this movement in Japan? Thinking if I should just wait till I go back to visit the US

The strap looks great. Regarding the cost of a service, they can vary quite a lot depending on where you live, and it's typically related to cost of living and overhead as opposed to parts. You can find places in any major city who will quote prices like that to a stranger who walks in off the street. There's no reason yet to think that your watch will need any expensive parts, so the price you are quoted should just be a basic service price. Once the watch is disassembled, the watchmaker might learn that parts are needed, and that could add to the price.

If you can find any forum members who live in Japan by using the search function, you might send them a PM to ask how they get their watch serviced.
 
Posts
5
Likes
6
The color of the strap fits the watch perfectly.
Thanks! I was super happy to find it. Was worried it was a bit too light but think it will darken up in time
The strap looks great. Regarding the cost of a service, they can vary quite a lot depending on where you live, and it's typically related to cost of living and overhead as opposed to parts. You can find places in any major city who will quote prices like that to a stranger who walks in off the street. There's no reason yet to think that your watch will need any expensive parts, so the price you are quoted should just be a basic service price. Once the watch is disassembled, the watchmaker might learn that parts are needed, and that could add to the price.

If you can find any forum members who live in Japan by using the search function, you might send them a PM to ask how they get their watch serviced.
Thanks for the advice! I will try that.