- Posts
- 9,217
- Likes
- 24,055
oddboy
·Now THAT'S the kind of answer I was asking about! Thank you!! It's not out there, so that's that and a little project of mine goes by the wayside. No big deal really. Case closed (no pun intended).
It's not that hard...
using diameter of the movement as a proxy for the dial size:
Omega 321: Dm= 27.0mm, Do= 27.5mm
http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&2&2uswk&Omega_321
Omega 861: Dm= 27.0mm
http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&2&2uswk&Omega_861
for the smaller automatic cousins:
7750: Dm= 30.0mm, Do= 30.4mm
http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&2&2uswk&Omega_1164
ETA 2892: Dm= 28.0mm, Do= 28.4mm
http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&2&2uswk&ETA_2892
