Community Stories

Calling all Pocket Watch Buffs

TexOmega
Posts
8,095
Likes
58,217
0.935 (like on my case back) was used to indicate it was Swiss Made Sterling Silver for domestic consumption(not for export)


or by looking at the oxidation it is sterling
 
Canuck
Posts
14,624
Likes
42,450
TexOmega TexOmega
0.935 (like on my case back) was used to indicate it was Swiss Made Sterling Silver for domestic consumption(not for export)


or by looking at the oxidation it is sterling

The topic of .935 silver is discussed at length on the website to which I provided the link. I have re-read it several times, and didn’t come away with the notion that the .935 quality of silver alloy was only for domestic use in Switzerland. It discusses in length about exporting .935 silver watch cases to England, however.
 
TexOmega
Posts
8,095
Likes
58,217
paraphrasing....."After 1908, British law required that imported silver (0.925 with no tolerance) watch cases had to be assayed and hallmarked in a British Assay Office......"

Mine does not have any British Assay Hallmark. Only Swiss Hallmarks(0.935 and single bear)

And my movement has no USA import stamp.

So, I concluded it was (most likely) for the Swiss Market......and since I did not state "only" for the domestic market(Swiss) I left open the possibility it could be exported to other countries with less stringent importation laws, say, maybe Albania😁::rimshot::

I could be jumping to conclusions.

Bring on the kitty Kats.........
 
GettyImages-10100201-scaled.jpg Image 4.jpg
Canuck
Posts
14,624
Likes
42,450
Aside from all that, was the image of the Electa (Gallet) that I posted, of any value to you?
 
TexOmega
Posts
8,095
Likes
58,217
Canuck Canuck
Aside from all that, was the image of the Electa (Gallet) that I posted, of any value to you?



Yes, thank you for pointing me towards Gallet/Electa.

I googled and found this from WUSeek........which I had completely forgotten I posted questions asking for information back when I bought it. Must have been before or right when OF started and I was just getting into wristwatches after 20+ years into pocket watches.

Appears the movement is above average like the children in Lake Wobegon........😁

a response from the thread:


HOROLOGIST007
13342 posts · Joined 2013
#12 · Sep 19, 2014
Response from Gallet
QUOTE
"An extra fine 17 Jewel Gallet-Electa factory movement, almost a chronometer with its 4 adjustments. The movement can be adjusted better so that the regulator is not pushed all the way to the slow side. The nick at the 9 would be less obvious if the dial was cleaned and the numbers were filled with antique colored luminous. Also, an original rose gold onion style crown would be better that the modern version now installed. These issued would have been addressed if the watch was serviced by Gallet."
UNquote.

I too noticed a poor replacement crown, but that is up to you.......



and then he wrote about another Gallet watch........



then he signed off with this piece of info:

PS: My dating was correct.
Adam


he said 1910-1920, probably 1917

and this:


OK.
My current task at the NAWCC museum is to re-search and re-write the description database for all the wristwatches. There are about 1260Pcs. I have completed 29 pcs, its taking sometimes 4 hours to research a timepiece. I will be blogging more.
Let me share this completed one with you.


His name was/is Adam Harris

And he seemed to have access to Gallet people through his help at NAWCC.

So, both you @Canuck (now) and Mr. Harris (then) are and were a great help to me.

Still looking for a proper crown
Edited:
 
SOG53
Posts
2,188
Likes
4,379
Hamilton Model 23 Deck watch, WWII, unusual silver caseback and bezel
 
IMG_8980jp.jpg IMG_8977jp.jpg IMG_8978jp.jpg
CBM1590
Posts
979
Likes
3,806
TexOmega TexOmega
I hope you saw the broken dial if you got it.
I didn’t bid, but I didn’t see the broken dial either. Mistake on my part and I won’t forward any other links. Apologies.
 
TexOmega
Posts
8,095
Likes
58,217
CBM1590 CBM1590
I didn’t bid, but I didn’t see the broken dial either. Mistake on my part and I won’t forward any other links. Apologies.


No reason to stop if you see something interesting......we ALL are here to see and discuss pocket watches.👍
 
CBM1590
Posts
979
Likes
3,806
TexOmega TexOmega
No reason to stop if you see something interesting......we ALL are here to see and discuss pocket watches.👍
Just don’t want to wear out my welcome. I like it around here 👍
 
TexOmega
Posts
8,095
Likes
58,217
SOG53 SOG53
Hamilton Model 23 Deck watch, WWII, unusual silver caseback and bezel


relatively uncommon case........but silver cased watches(wrist and Pocket)could be requested......IF YOU HAD RANK and knew somebody.
 
TexOmega
Posts
8,095
Likes
58,217
CBM1590 CBM1590
Just don’t want to wear out my welcome. I like it around here 👍



we'll ask you to leave if you start boozing and then posting Invicta's and Shinola's 😁




The first thing I do when looking at pictures of a watch is say, "where are the flaws on the dial?" and then just pour over that dial with a critical eye. Then I look at the hands...."are there three hands?" and if so, "are they correct for this watch?" If you cannot answer that question OUTRIGHT, google till you figure it out.
Edited:
 
pdxleaf
Posts
5,398
Likes
18,804
My lever set just broke on my 992 Hamilton. 🙁
Just snapped with no pressure. I can still get a fingernail under it to lift it setting the time.

Anyone know if there is a replacement part available? Will I need to scavenge another movement, and if so, are there other movements besides the 992 that will fit?

I confess to not doing my own internet research first. That's next.

Thanks in advance.

Dave
 
Canuck
Posts
14,624
Likes
42,450
pdxleaf pdxleaf
My lever set just broke on my 992 Hamilton. 🙁
Just snapped with no pressure. I can still get a fingernail under it to lift it setting the time.

Anyone know if there is a replacement part available? Will I need to scavenge another movement, and if so, are there other movements besides the 992 that will fit?

I confess to not doing my own internet research first. That's next.

Thanks in advance.

Dave

Pictured is a setting lever out of a Hamilton grade 975 (hunter), lever set. Basically the same movement as a 992 with minor differences. Compare your broken lever and let me know if you can use this one.

IMG_2066.jpeg
 
pdxleaf
Posts
5,398
Likes
18,804
Canuck Canuck
Pictured is a setting lever out of a Hamilton grade 975 (hunter), lever set. Basically the same movement as a 992 with minor differences. Compare your broken lever and let me know if you can use this one.

IMG_2066.jpeg


Thanks. Yours looks similar. Maybe I am remembering it wrong. I thought it was fatter. Am I wrong and it's actually correct? Could be my bad eyesight in combination with my bad memory.

1000020075.jpg 1000020076.jpg 1000020071.jpg 1000020074.jpg


I noticed it after hanging it on the wall, which is something I have wanted to do for awhile. Maybe I assumed it was busted.

1000020077.jpg
 
Canuck
Posts
14,624
Likes
42,450
pdxleaf pdxleaf
Thanks. Yours looks similar. Maybe I am remembering it wrong. I thought it was fatter. Am I wrong and it's actually correct? Could be my bad eyesight in combination with my bad memory.

1000020075.jpg 1000020076.jpg 1000020071.jpg 1000020074.jpg


I noticed it after hanging it on the wall, which is something I have wanted to do for awhile. Maybe I assumed it was busted.

1000020077.jpg


We’d pretty well need to see your setting lever with the dial off.
 
Duracuir1
Posts
2,843
Likes
30,231
I won this one at a Detroit auction just now. Looks to be 42 or 43 mm. I like that size and it’s a nice looking watch. $325 plus auction fees etc… should be right around $600 CDN. I may try to pick it up tomorrow if weather permits.
IMG_8768.png IMG_8769.png IMG_8771.jpeg IMG_8772.jpeg IMG_8773.jpeg IMG_8775.jpeg IMG_8776.jpeg IMG_8777.jpeg IMG_8778.jpeg IMG_8779.jpeg IMG_8780.jpeg
 
1492 More Posts...
Sign up or log in to reply...