550 Rotor Pinion question

Posts

241

Likes

353

unxsr

·Jul 27, 2022

My 751 movement runs but stops randomly and I believe it's because of the worn rotor pinion.
I came across these videos which I assume it's @Archer

Is there a way to replace this safely without a Horia tool? Not sure how tight these are connected to the oscillating weight, but was hoping I could do this on my own. Thanks in advance!

 

Posts

15,666

Likes

46,803

Canuck

·Jul 27, 2022

A staking tool can be used to do this job. If you don’t have a staking tool, that could be a problem.

 

Posts

241

Likes

353

unxsr

·Jul 27, 2022

Canuck

A staking tool can be used to do this job. If you don’t have a staking tool, that could be a problem.

Thanks for the reply. Could you send me some links that I should look into?

 

Posts

15,666

Likes

46,803

Canuck

·Jul 27, 2022

Do you mean links that show how to replace the rotor bearing gear without appropriate tools? If that is your question, then no I can’t recommend any links.

 

Posts

241

Likes

353

unxsr

·Jul 27, 2022

Canuck

Do you mean links that show how to replace the rotor bearing gear without appropriate tools? If that is your question, then no I can’t recommend any links.

Oh I meant links to the tool itself as I'm not quite sure which tools you're referring to. Thanks.

 

Posts

15,666

Likes

46,803

Canuck

·Jul 27, 2022

Go to Google, and search for “watchmaker’s staking tool”.

 

Posts

29,958

Likes

77,447

Archer

·Jul 27, 2022·Omega Qualified Watchmaker

How do you plan to ream out the new pinion to fit the axle?

 

Posts

241

Likes

353

unxsr

·Jul 27, 2022

Archer

How do you plan to ream out the new pinion to fit the axle?

Hmm, I was hoping to gently press it down with force but as I'm typing this sounds like a bad idea. I'll take it to my watchmaker.

 

Posts

29,958

Likes

77,447

Archer

·Jul 27, 2022·Omega Qualified Watchmaker

unxsr

Hmm, I was hoping to gently press it down with force but as I'm typing this sounds like a bad idea. I'll take it to my watchmaker.

This is not a DIY job...

 

Posts

5,631

Likes

5,813

SkunkPrince

·Jul 27, 2022

Archer

This is not a DIY job...

Not that Al needs my support but my watchmaker always tells me that there is risk even when he inserts a bushing. If the watchmaker is concerned... then step away from the watch!