Forums Latest Members
  1. Omega alan May 13, 2019

    Posts
    51
    Likes
    85
    My new Seamaster gets an occasional wash in body temperature water (to not cause a thermal shock) a soft brush used with a bit of bar soap used like an old fashioned shaving brush.
    This appears to to a good job it's rinsed off (body temp again) and dried using a microfibre towel.
    When it comes to more intimate cleaning, particularly around/under the bezel what's the thought on an ultrasonic tank? I've used it on bracelets and have been amazed (horrified!) at what comes out!
    I'm thinking the cheap types sold for CDs and jewelry?

    Alan
     
    superfly likes this.
  2. STANDY schizophrenic pizza orderer and watch collector May 13, 2019

    Posts
    16,353
    Likes
    44,932
    Are you taking the movement out of the case before ?

    Are we talking a modern diver ?

    For me it’s a rinse then a toothbrush with water and a touch of dishwashing liquid and rinse again for my divers

    Or a soak with the fishes :cool:
    B9189301-6E66-4924-B860-9B7C2033D9EA.jpeg
     
    Edited May 13, 2019
    Paul_G, wagudc, Omega-Q and 2 others like this.
  3. AntonisCy May 13, 2019

    Posts
    977
    Likes
    1,119
    @STANDY's watch sleeps with the fishes :D
     
    RedarT and STANDY like this.
  4. Dohnut May 13, 2019

    Posts
    128
    Likes
    219
    Generally a rinse under lukewarm water, mild soap agitated with a soft toothbrush, rinsed again and dried with a microfiber/hairdryer on cold setting.

    @STANDY - I'd go easy on the dishwashing liquid... most, if not all, contain salts which aren't friendly to rubber seals etc.
     
    superfly and STANDY like this.
  5. STANDY schizophrenic pizza orderer and watch collector May 13, 2019

    Posts
    16,353
    Likes
    44,932
    Not in my eco friendly house, that has banned all products that are harmful to the environment or animal tested. I live remote and am a keen fisherman, scrutinise everything that goes in the water. We even make our own washing powder and cleaning products.
    Mrs Standy is a entomologist who even cares for the insects by building houses like below for them

    DDA0350E-27C7-4CC5-86D3-C7E02559778A.jpeg

    Even have a little basket hanging in the garden for birds to get nest supplies, sticks, grasses, wild cotton. ;)
     
    mega_man, Linzer, Pun and 12 others like this.
  6. redzer007 May 13, 2019

    Posts
    620
    Likes
    2,308
    I know stating the obvious never put an automatic watch in an ultrasonic cleaner.
     
  7. Omegafanman May 13, 2019

    Posts
    4,578
    Likes
    17,168
    01 - Copy.JPG
    Bimmerman77 and Meme-Dweller like this.
  8. boraxman May 13, 2019

    Posts
    298
    Likes
    174
    So far a quick shot of water and dry with a soft cloth has been working for me.
     
  9. SantaCruz May 13, 2019

    Posts
    90
    Likes
    103
    This arrived via Amazon UK today.
    I’m gonna give it a try with a very fine microfibre cloth.
    F684DAEE-E764-4F9E-9B81-B1A305E91F24.jpeg 7FA60199-555C-484F-99E2-25031CCEBE58.jpeg
     
  10. VetPsychWars Wants to be in the club! May 13, 2019

    Posts
    2,326
    Likes
    1,862
    I use Dawn dishwashing liquid, a stiff nylon brush, and whatever comes out of the tap. You can let it warm up a bit to get the soap off. Then towel or microfiber, whichever is close to hand. Been doing this for decades and when asked, my watchmakers have all said that the watch exterior is fine and nothing has gotten inside.

    Note that these are stainless, waterproof watches.

    Tom
     
  11. VetPsychWars Wants to be in the club! May 13, 2019

    Posts
    2,326
    Likes
    1,862
    As for ultrasound of an assembled watch, in theory that can be done to "clean" an assembled movement, but I would never do it. There's no need for it. By all means, remove the bracelet and ultrasound-clean that if you want.

    Tom
     
  12. 77deluxe May 13, 2019

    Posts
    2,058
    Likes
    4,613
    Lukewarm water and a soft cloth.
     
  13. Bp1000 May 13, 2019

    Posts
    622
    Likes
    2,825
    Bit of soap, lukewarm water every 1 - 3 months. Dry with soft cloth. Thats all i do.

    I dont wipe the case with anything day to day. It just introduces scratches. Rinse before using any cloth. Exception are sapphire crystals get a wipe if they have marks. Tend to be a lot more careful with hesalite.
     
  14. M'Bob May 13, 2019

    Posts
    6,407
    Likes
    18,206
    Go to any commercial car wash, and with the watch on, hang your arm out the window. Both the watch and the interior of the car get incredibly clean...
     
    Motik, wagudc and savio.79 like this.
  15. Kenj May 13, 2019

    Posts
    29
    Likes
    80
    I find shampoo does a very nice job wear mine in the shower and never had any problems Rolex 1964 date.
    Use ultrasonic for customers watches remove strap and clean watch by hand cannot trust other folks seals.
     
  16. Omega alan May 13, 2019

    Posts
    51
    Likes
    85
    Interesting! In theory I can't see why a waterproof watch (Seamaster 300m) couldn't be ultrasoniced but it's obviously not the sort of thing you guys do, I shall continue using a soft brush and soap as and when required.

    Alan
     
  17. redzer007 May 13, 2019

    Posts
    620
    Likes
    2,308

    Small chance the water could vibrate past the seals , however main reason is the vibrations could dislodge/loosen a screw, and again the vibrations will most likely cause the lubricating oil to migrate from those places that need them.
     
    gpssti4 and blacka01 like this.
  18. Buster May 16, 2019

    Posts
    78
    Likes
    184
  19. Bimmerman77 May 16, 2019

    Posts
    261
    Likes
    197
    I use wristclean on my watches. Used to be called Veruet I believe. A big bottle costs like 8 bucks and lasts forever. Watches seem to come out cleaner than dish soap and minimal rinsing. Can also spray and wipe sans water too.
     
  20. Walrus May 16, 2019

    Posts
    8,946
    Likes
    42,085
    I’m not a big environmental guy but that is cool stuff you are doing.
     
    STANDY likes this.