- Posts
- 2,609
- Likes
- 6,683
seekingseaquest
·Up for sale are 1) a 7912 / #7 bracelet, 2) a 1175 / #48 bracelet, 3) three spare #4 endlinks, 4) a 24 tooth / flat foot crown for early SM300s, and 5) a 24 tooth / flat foot logo crown for early Railmasters. For more information on the references the bracelets fit (with the appropriate endlinks), please see this chart. Full info is below.
Flatlink Bracelets
Note: wonky non-functional 7912 stretch links have been replaced - see my reply below.
1. 7912 flatlink bracelet w/ #7 endlinks
Bracelet is in decent, unpolished condition. Comes with 10 stretch links, all of which are fully functional (I recently replaced the springs on the four that were faulty previously - see photo in my reply below). One of the non-functional stretch links has some rust on the front (edit: most of this has no been removed - see photos below). Length is a little under 15cm from springbar to springbar (unstretched). Bracelet clasp is dated to 4/62 (Q4 1962).
Price: $1300 (reduced from $1400) without endlinks, +$200 with the original #7 endlinks which fit Seamasters/Rancheros of the era.
2. 1175 flatlink bracelet w/ #48 endlinks
Bracelet is in nice, unpolished condition. One link has some corrosion on it. Comes with two spare links - one of which needs a new spring bar. Length is 14.5cm from springbar to springbar + ~1cm from the two spare links. Bracelet clasp is dated to 10/70 (October 1970).
Price: $550 (reduced from $650) bracelet only, +$200 with the original 19mm #48 endlinks [endlinks now sold, bracelet still available].
3. Spare 18mm #4 endlinks
3a. [top] One double notch endlink in nice condition. $100 [sold]
3b. [middle] One single notch endlink in nice, seemingly unpolished condition (clear brushing on the inner link area). $110.
3c. [bottom] One zero notch (weird, I know) endlink with a noticeable scratch on the right-hand side. $75 [sold]
Crowns
(if anyone knows what the one on the right fits, please let me know)
4. [left in photo above] Vintage 24 tooth / flat foot logo crown for early Seamaster 300s
Dimensions: 6.8mm diameter, 3.4mm thickness, 2.5mm tube, 0.9mm stem
Nice condition, appears to be NOS. Has light scratches from sitting in a drawer for 60 years. No guarantee on gasket condition.
Price: $350
5. [middle two in photo above] Vintage 24 tooth / flat foot logo crown for early Railmasters
Dimensions: 6.8mm diameter, 3.7mm thickness, 2.5mm tube, 1.2mm stem
Both are in nice condition and appear to be NOS. Have light scratches as to be expected. No guarantee on gasket condition.
Price: $350 each (one sold - one still available)
Flatlink Bracelets
Note: wonky non-functional 7912 stretch links have been replaced - see my reply below.
1. 7912 flatlink bracelet w/ #7 endlinks
Bracelet is in decent, unpolished condition. Comes with 10 stretch links, all of which are fully functional (I recently replaced the springs on the four that were faulty previously - see photo in my reply below). One of the non-functional stretch links has some rust on the front (edit: most of this has no been removed - see photos below). Length is a little under 15cm from springbar to springbar (unstretched). Bracelet clasp is dated to 4/62 (Q4 1962).
Price: $1300 (reduced from $1400) without endlinks, +$200 with the original #7 endlinks which fit Seamasters/Rancheros of the era.
2. 1175 flatlink bracelet w/ #48 endlinks
Bracelet is in nice, unpolished condition. One link has some corrosion on it. Comes with two spare links - one of which needs a new spring bar. Length is 14.5cm from springbar to springbar + ~1cm from the two spare links. Bracelet clasp is dated to 10/70 (October 1970).
Price: $550 (reduced from $650) bracelet only, +$200 with the original 19mm #48 endlinks [endlinks now sold, bracelet still available].
3. Spare 18mm #4 endlinks
3a. [top] One double notch endlink in nice condition. $100 [sold]
3b. [middle] One single notch endlink in nice, seemingly unpolished condition (clear brushing on the inner link area). $110.
3c. [bottom] One zero notch (weird, I know) endlink with a noticeable scratch on the right-hand side. $75 [sold]
Crowns
(if anyone knows what the one on the right fits, please let me know)
4. [left in photo above] Vintage 24 tooth / flat foot logo crown for early Seamaster 300s
Dimensions: 6.8mm diameter, 3.4mm thickness, 2.5mm tube, 0.9mm stem
Nice condition, appears to be NOS. Has light scratches from sitting in a drawer for 60 years. No guarantee on gasket condition.
Price: $350
5. [middle two in photo above] Vintage 24 tooth / flat foot logo crown for early Railmasters
Dimensions: 6.8mm diameter, 3.7mm thickness, 2.5mm tube, 1.2mm stem
Both are in nice condition and appear to be NOS. Have light scratches as to be expected. No guarantee on gasket condition.
Price: $350 each (one sold - one still available)
Edited:
