- Posts
- 3
- Likes
- 0
Ic.Surgeon
·I found this watch that I’m heavily interested in, but I want to make sure it’s a legit omega before I purchase and just wanted help in making sure I’m making a correct purchase. Pictures will be posted
Trying to buy my first omega
- Posts
- 150
- Likes
- 167
reggie_v
·Looks like a late 50s generic omega. Don’t know much about these but the movement looks legit to me
- Posts
- 17,932
- Likes
- 37,492
JimInOz
··Melbourne AustraliaLegitimate US cased Omega.
You can just make out the US import code for Omega (OXG) on the balance cock.
Case was made for Norman Morris Corp (US Omega agent at the time) by Jonell Watch Case Company of Long Island, New York.
Serial number dates the movement to about 1963.
You can just make out the US import code for Omega (OXG) on the balance cock.
Case was made for Norman Morris Corp (US Omega agent at the time) by Jonell Watch Case Company of Long Island, New York.
Serial number dates the movement to about 1963.
- Posts
- 29,659
- Likes
- 76,811
Archer
··Omega Qualified WatchmakerNote - one screw s missing from the automatic bridge, so this likely will need a service so I would count that into what you would pay.
- Posts
- 24,229
- Likes
- 53,955
Dan S
·Gold-filled base and embossed dial are signatures of an entry-level piece. I believe that I see some minor brassing on the edges of the lugs. The movement is of course, high quality, but the low jewel version for US import and I see some wear on the rotor.
If very cheap, it could be appropriate for occasional wear, but I would be cautious about investing much into it. What is the asking price?
If very cheap, it could be appropriate for occasional wear, but I would be cautious about investing much into it. What is the asking price?
- Posts
- 13,192
- Likes
- 22,932
Davidt
·I agree. It’s fine, but an entry level piece and certainly nothing special. It shouldn’t be in the same price category as a constellation or seamaster.
- Posts
- 2,162
- Likes
- 1,350
DON
·Incorrect crown? Should sit closer to the case. Signed
- Posts
- 3
- Likes
- 0
Ic.Surgeon
·Gold-filled base and embossed dial are signatures of an entry-level piece. I believe that I see some minor brassing on the edges of the lugs. The movement is of course, high quality, but the low jewel version for US import and I see some wear on the rotor.
If very cheap, it could be appropriate for occasional wear, but I would be cautious about investing much into it. What is the asking price?
- Posts
- 99
- Likes
- 83
lenndon
·They want close to 800
Also the crown seems wrong.
For 800 you should get a nicer piece, especially if you are not fixed on that exact model.
- Posts
- 24,229
- Likes
- 53,955
Dan S
·They want close to 800
- Posts
- 3
- Likes
- 0
Ic.Surgeon
·Legitimate US cased Omega.
You can just make out the US import code for Omega (OXG) on the balance cock.
Case was made for Norman Morris Corp (US Omega agent at the time) by Jonell Watch Case Company of Long Island, New York.
Serial number dates the movement to about 1963.
800 what?
- Posts
- 24,229
- Likes
- 53,955
Dan S
·With some patience, you could probably get a gold-capped 1960s Omega automatic for about that price (Seamaster, SMDV, or Geneve), and I would rather see you with that than the 10k gold filled case and other issues.
