Would any of you good folks have a gold (gold filled was correct but will take anything the correct colour) pusher hiding in a drawer somewhere that's suitable for a Chrongraphe Suisse running a Venus 170 movement? There's a photograph below:


I measure the one left at 5 x 1.3 mm.

The pusher should look like one of these (only a different colour): http://i1379.photobucket.com/albums/ah139/eronkina2/Breitling%20oval%20pushers/37BD720A-2B0A-4C30-BB9F-95E30F2CC53D_zpse0rwroey.jpg~original

Thanks for reading and, as always, thanks OF for the space.

 

Can I give this a bump ... anyone have a pusher sitting in a parts bin or drawer? Will take two if they're a better match or even a scrapper if those parts are usable.

Thanks

 

@jimmyd13 this popped up on eBay, though will need to ask seller for side photo and measurement. Hope this helps!

https://www.ebay.com.au/itm/Case-Of...957767?hash=item2f0f0cc407:g:bgkAAOSwvR5aDVPVPurchases made through these links may earn this site a commission from the eBay Partner Network

 

Will do