Stories Community
Forums Latest Members
Forums > General Discussions > Open Discussion >

is inkjetting accepted practise now?

  1. al128

    al128 unsolicited co-moderation giverer Nov 3, 2016

    Posts
    2,203
    Likes
    2,017
    [​IMG]

    ::facepalm1::
     
  2. JimInOz Ω 2

    JimInOz Melbourne Australia Nov 3, 2016

    Posts
    15,467
    Likes
    32,304
    ?
     
  3. Canuck Ω 1

    Canuck Nov 3, 2016

    Posts
    13,462
    Likes
    37,929
    ?+1.
     
  4. ulackfocus

    ulackfocus Nov 3, 2016

    Posts
    25,983
    Likes
    26,972
    Inkjetting? Is there a squid in the picture that we're all missing?
     
  5. cicindela Ω 2

    cicindela Steve @ ΩF Staff Member Nov 3, 2016

    Posts
    15,047
    Likes
    23,789
    I think the bezel was made on an inkjet then cut out.
     
  6. ulackfocus

    ulackfocus Nov 3, 2016

    Posts
    25,983
    Likes
    26,972
    They shoulda done the same with the dial. :p
     
  7. al128

    al128 unsolicited co-moderation giverer Nov 4, 2016

    Posts
    2,203
    Likes
    2,017
    might not show on a phone ...

    right click on the pic -> open in new tab and then look at original size ... the blue/red interior bezel is either inkjetted or a cutout from a magazine :D
     
  8. ulackfocus

    ulackfocus Nov 4, 2016

    Posts
    25,983
    Likes
    26,972
    Dot matrix! :p
     
    ahartfie likes this.
  9. JimInOz Ω 2

    JimInOz Melbourne Australia Nov 4, 2016

    Posts
    15,467
    Likes
    32,304
    I see what you mean now.

    Didn't cut a very good circle just here.

    Screen Shot 2016-11-05 at 12.28.46 PM.png

    Is the "bezel" lifting off the dial here?

    Screen Shot 2016-11-05 at 12.26.53 PM.png