Hi Forum here is my Flightmater Story , this was my first Omega watch that I bought as collector this was in 2002 , bought from a collector in California via EBay and paid at that epoc something around 2300.- USD , when I receive it watch goes to a service to Omega at that epoc and enjoyed them for years and still , in 2021 second service in 2002 I keep all the old parts and as I had excellent contact with some persons at the SAV in Bienne the watch was serviced with some exceptions: put back the rotating inner bezel back from old parts Put back old hands Put back old pushers No polish all goes well except the pushers but the watch is much original than before and serviced and warranty , now as I don’t have a watch project I decided to go back about the pushers as the single color are rare but here I did not take attention until now 1 yellow 1 red I saw people and some pictures with 2 reds and a couple of dead web links about yellow but did not see anything , now I will do whatever is needed to put it back but I have one of each color was this possible ? and if I get it mounted : red UP Yellow Down Yellow UP Red Down shall I chase a yellow one ? maybe an exchange with the red ? well Forum any advise appreciated Paul
Would go with repaint of the red one...as many of those are repainted anyway, as the paint is easy to peel from the polished steel...